Search results

Got it.. apologies for the delay in responding..

Just an FYI, many insurance companies will only cover freeze damage if the winterization was performed by a dealer/yard, etc.

ok; got it... the ACR one I mentioned above is a good unit

I didn't look for battery powered, so I can't offer any suggestions on that aspect.

Hi, When you "say" wireless, do you power or remote? ACR (model ACR RCL-95) makes an excellent spotlight wired for power and wireless remote for operation.

I would try some polishing (not rubbing) compound followed by some wax or a cleaner/wax product. I believe polishing compound is about as least aggressive as it gets with still be effective.

ok.. If you are trailering and doing your own maintenance and winterization, then I'd figure about $3k - $4k for maintenance and minor repairs. Storage is highly variable by area, so I can't comment on that... I hope this helps. Good luck...

"how about maintenance budgeting?" Hi, Welcome to the forum... Lots of variables here: Are you boating year round? How many hours per year are you running? Are you doing the maintenance yourself? Are you asking about maintenance only or are you also asking about repairs? Are you the "open...

Nightfighter: I don't know anything about Celtic Mist, but my 2018 306 is up for sale. It's listed in the "For Sale" forum here on Great Grady. Edit (adding link): https://www.greatgrady.com/threads/2018-grady-white-canyon-306.36947/ The boat is in the water until early in the first week of...

Hi, Thx for the compliment. It's a great boat. I haven't decided what's next. I may take a hiatus from boating for a season or two.

Boat and Engines (no trailer): $225,000 2018 Grady-White 306 Canyon 2018 Twin Yamaha F350s with =~ 450 hours: Engines are under Yamaha warranty until May 30, 2025 Condition: very good/clean; well maintained. Boat, engines and installed equipment have been maintained by Grady-White/Yamaha...

Glad it turned out to not be water logged foam. Not being a jerk here, but did you not even try to feel along the bottom? Perhaps now might be a good time to do a full strip of the bottom and start with full redo/refresh of the bottom paint. (Yeah, I love spending OPM.)

Hi, I have a 2018 306 Canyon, which I believe is basically the same hull as the 307 Freedom. I have twin 350s, but feel twin 300s would be perfectly fine. I think it is a great hull. There are those who say it pounds, but I haven't experienced that... A dock neighbor has a 307 and seems to be...

Honestly, I think the whole monochromatic color scheme is too much. I like some contrast.

To lessen how quickly it fills up: men pee over the side & ask the women to NOT flush every time they pee.... also, to lessen the chance of clogging, do not use too much TP and make sure there is plenty of water to soften the TP... (Don't ask me how I know...really, don't ask.. I don't want to...

shitty situation

The "C Series" 350s should be fine, but still have the flywheel replacement requirement. FWIW" I am at 430 hours and haven't run into the replacement yet. By white water, do you mean fresh water? If so you could always use a bladder or get small water maker.

"who does that?!" ....I do.. ;) I live my a certain ideal..."Do unto others" (though I am not overly religious) To test whether the vent is clear, you could open the pump-out fitting on the gunnel (yeah, I know gunnel is mis-used), which would allow air to flow into the system. Regarding...

Hmmm... At this point, I am about out of ideas. However, I would be willing to come to the boat (if it's in Boston/nearby) to take a look,

I don't think air leaks are the issue, because I don't think it's a "vacuum based" system. I think it is more so gravity fed. I am not 100% sure of this, though.