Search results

Agreed. Mounting wise the OEM Sureflow was mount in same space only lower or below water line somewhat. It lasted 11years. New pumps have been mounted at roughly same height/location =/- 1-2inches. This is realy start to anger me...if I was to get a whole season then fine but I am not even...

Pumps have been failing after just a couple of outings. Brand does not matter as I have tried 3 different with same short life. Pump get switched on once fish come in the boat and in the flurry of the action the pump does not get shut off before we pick up to chase jumpers (tuna). The pump...

Agreed Techron is expensive if you run with every tank. Not if you buy fuel with it already mixed as is the case with Chevron and Shell brand gasolines. This would appy to trailerable boats of course, which just happens to be my case.

Re: help needed for max gross weight for Grady White Gulfstr Grady website have product brochures for all model by year back to 1968 @ http://www.gradywhite.com/customer/catalogs/ Pick the approx year and scroll the PDF until you find model(s) and check the empty weight detailed in...

I have been using Techron in place of Ringfree with same results as Ringfree for three years now. @ 6.99 per 12oz from Amazon it hard not to run Techron.

I have a terrible washdown pump issue with my Voyager 248 that I think I have solved but looking for some input from other Voyager/Journey owners - specifically, how many inches above the bildge floor is the top of your washdown pump mounted?? I believe when replacing the original pump I...

Never out here in Oregon.... River fishing in the winter and salt the rest of the year.

Same electronics as installed for past 9years. Only addition is elec-start 8hp kicker motor connected to battery switch. Maybe the kicker is causing surge in system - will connect directly to battery. I will fiddle with connections etc... to see what I can sort out.

Re-occurring washdown pump issue. 1. OEM pump crashed two years ago. Replaced with same pump as it was clearly trashed and time for new. 2. Replacement crashed after one day of use. Thinking I had ground problem, I chased down and all appeard fine. Same time swapped in new panel...

Typically, winter offers a few days here and there for bottom fishing and crabbing, although this winter has been far too rough so far. Forecast for this week is 8-18ft seas and 15-40mph winds…that has pretty much been the story for past 70-80days. Usually we get 6-7day storms with 2-3day...

I mounted the bracket so that it did not cover the motorwell scupper. The pic shown about was snaped during the fitting stage.

The Prop is 15 1/4in x M-17

Steering is tied to the big motor with inexpensive universal rod. Works great on all but the gusty days when steering and throttle are required to keep her tracking straight. I will need to get back to you on the prop specs.

USCG restricts recreational and commercial differently with more conservative restrictions on recreational craft. Swell direction and size along for forecasted seas and winds are the determining factors with recreational restrictions beginning at 3ft for small rowing and paddle craft, 4-6ft...

I love Depoe Bay - the entrance keeps a lot of wankers away and its closest to the tuna most years. Good people and skilled anglers with excellent USCG station working to keep everyone safe. Pic below is a single handed tuna day with a Salmon limit to cap off a fine July outing. My first...

Install a 10-12in wide low profile roller or bump pad for the keel to ride on. My dual alxe trailer had them installed OEM. Check out: http://shop.easternmarine.com/index.cfm ... goryID=201

Stainless bracket purchased from Grady Dealer in Seattle - slips over Euro Transom and through bolted with two bolts through motor bracket and third bolt in center through only bracket and transome only. The Bracket was built to fit over several models of Euro Transoms so it required a 3/8in...

1-screen name, 5-Salt Fever 2-your first name, Calvin 3-year and model of your boat, 97 Voyager 4-year and the power that you have on your boat 97 OX66 250hp

Shipped 248 Voyager from CT to Oregon in 2005 on it's trailer. About 3,600 total. At today's fuel price I would guess it go about $5,000

Same year, model, and motor....I get about 44mph @ 5500 rpm on light chop flat water 80gal of fuel. 3anglers, 200lbs of ice and 105 gallons of fuel @ 4400-4500 well net about 31-32mph in swells 3-4ft swell at 8-9sec a part with 1-2ft wind wave. Normal cruise running into same swell and wind...