Search results

Great trip and photos- Enjoyed the trip since we are on the ocean, we don't get a chance to see river and lake boating.

I had my side curtains remade this past summer and when the person that made the curtains came to install them, she had a tool that would grab the snap from the outside and allow her to pull the sunbrella fabric until it was able to be snapped. After a few hours the sunberella stretched and they...

aGrady has been out of the inboard market for quite some time. Good overall boat for your needs and family size would be a 22 for Seafarer. The Seafarer has a cuddy cabin and walk around and a few different transoms. I believe a swim platform was available on all mode;;s. It is a good all-around...

I have a 2004 Sailfish and repowered from F225s 3.3 L to F250 4.2L. Lot more overall power from the 250 from out of the hole , mid range and top end- when I first launch in the spring top end is a around 47 MPH. When I first got the new ones Yamaha was back orderd on props so I uses my 15 1/4...

We have a slip that has lots of wind and strong tide currents and for years I docked stern in with no bow thruster - not easy but doable on most days.. Many boats in the marina with thrusters have tough times docking. A few years ago I notice the police boats and Sea Tow boats were all docking...

Raeally ppreciate this - nice job! gives me ideas to work on over the winter - tx

Hook up - thanks for the info - I suspect the size is similar between the two boats. I like the flush mount you did on lower helm . Does the 8612xsv flush mount you have installed just two pieces of starboard. That set up allows for much larger screen that the units that fit entirely in the...

Mine was 3,500 in 2022- This was removing twin engines and glassing over the applying the vinyl cap. I assume your boat is single engine, it sounds reasonable

Thanks JJF - Great info

Hi everyone - I am in the market for new electronics for a 28 Sailfish (Space Constrained). Currently have 2004 Furuno Nav Net , primarily used for radar and a 2012 Lowrance HDS 10 for navigation and sonar. Was interested if anyone has upgraded recently and really like their new systems...

https://www.amazon.com/dp/B08LD3W9MJ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1 - Perfect match and cheap and feels better than the rubber or plastic

Some people will use a plunger cup aattached to anti freeze jug and run the pump to suck anti freeze through it. Some say they just run the pump with the seacocks once the boat is out of the water. that clears water from the pump and anything before pump will drain out. The head I just add a...

What is your location?

Just started watching last week and it is very interesting and entertaining. Jealous of his gas milage.

I have had twins for years and honestly have never noticed any difference to the level of the boat if one engine was trimmed higher or lower - guess it it probably would impact speed and fuel consumption. The only way I have ever noticed any variance in trim levels is either a visual or gauge...

Grady White Dealers have the vinyl reopen placement - I had mine done last year. They also glassed over the open gap before applying the new cap - looks great and double sealed.

Befor I saw the price I would have said 40's. Big if here is have the engines exhaust been replaced, If not it is a prime candidate for the infamous dry exhaust issue.

28 Sailfish - these are blades and wiper - secured by nut and bolt to arm - very difficult to find other than NAPA NAPA Auto Supply Part # WIP 62065 Heavy Duty Wiper 20 Inch

Aside from tho pump I have 2 other issues with live wells not pumping. Once we a sandbar and somebody switched the live well on and the hose got jammed with sand. second time an eel got in the pickup. Most times it either you seacock closed on the pump is gone which as stated os an easy swap out

The old plastic one on mine broke and got the new ones that were friction held and the hoses attache the same way