Search results

Fin-Addict in NC has the Grady match starboard. Ask for Brown.

I also pulled out my C120 and Dragonfly and replacing with twin 12in Axioms! Mounting on my 265. BTW my old units sold on CL in days. Got my starboard panel that matches the Grady color from Fin-Addict in NC. Nice to work with and it perfectly matches. I cut the holes in the starboard using RM...

I've had success using the Spectrum paste- just enough to fill the damage- and covering it tight with wax paper so there are no wrinkles or air bubbles. Use the plastic squeegee to apply and get rid of the excess. After a couple of hours of setting, the wax paper can be removed from the patch...

Check Spectrum Color for their 2 oz matching gel coat paste. I bought some for my 2004 265 and it's a good match. Saves trying to match the color using pigments. You mix up what you need, add the catalyst and apply with a plastic squeegee. About $25 at iboats

Did you notice the flush panel beside the transom door? Looks like you can hook up a hose to each connection on the panel making it easier to flush the engine(s). I sent an email to Grady asking if this can be retrofit to other boats. It would seem that it would be possible to connect a...

3M provides good data on their products. Shear strength gives you an idea of its adhesion. 5200 on fiberglass- 362 psi. 4200 on fiberglass - 165 psi. So 5200 has about 2X better adhesion strength. However, the gelcoat value for 5200 is 519 psi (not given for 4200) so it adheres even...

Just ordered twin 12" Axiom MFD for my 265 Express plus the RV100 tducer for RealVision. Saw the systems at a show and it looks great and reasonably priced. The specs look good. The tducers are the pacing item for delivery so I probably won't have the stuff for 3 weeks or so. I'll report...

Eppem Indeed I am adjusting both. I have tried screwing in both screws, both sides, in as tight as they will go and then backing all off 1/2 turn at a time and trying that setting. If too tight, back them off another 1/2 turn and try. No go. Then I tried the reverse- backing all of them way...

Thanks for the input so far. I have contacted Grady about getting the part # and will look into getting the original design - perhaps mine is just worn out.

Perhaps something like this would work? It's a rubber latch and keeper http://www.ebay.com/itm/Southco-Flex-Dr ... 2386556834

Here you go The pic shows the catch - the male part goes into the housing that has 2 spring loaded balls and the screw you see is what is used to adjust the top spring tension. Another screw is on the bottom to tighten/loosen the bottom spring. The catch is on the aft side of the folding...

The 265 has the folding transom and two catches on the sides. The catches are adjustable but no matter how I adjust them, they're either too tight to fold or too loose and it falls down while underway. I've tried tightening them and lubrication the catch but NG. I'm thinking of adding a...

I also installed an Edson on my '04 265 and it has the oval wheel. Been on for 5yrs and it's been perfect. Here's what I have http://www.defender.com/product.jsp?pat ... 2&id=88737

Re: Anyone Use "Salt Away" or Similar Product as Engine Flus I connect the salt away container/injector in line with the hose flusher hose connector. I have dual engines so I made up a rig to flush both engines at once with the salt away container/injector feeding both engines. I also use SS...

One other thing to check- block corrosion where the thermostat is mounted. That vintage engine will have the same design as my '04s, which means the copper tstat can corrode the block to the point where a hole forms and salt water is squirted into the air intake. I posted about this a few...

As someone said be sure to check the block at the thermostat housing. The copper tstat touches the aluminum block and the block corrodes. I posted my horror story before- the corrosion was so bad it went through the block and squirted salt water into the air intake. The result- a new...

I always run the port engine only with the port battery using the battery switch. Same for the stbd engine/battery. The house battery is charged using a Cole-Hersee smart isolator/charger with its own switch. Works great- the batteries are always fully charged.

Not 100% certain it was the original but it looks like the pics in the literature and is all stainless. The Bosch wiper has a narrow groove width compared to the other blades I checked out.

FYI - after searching for a suitable replacement wiper (just the rubber wiper, not the whole blade assembly), I found the Bosch Microedge 18" blade fits perfectly. They only sell the whole frame and wiper so you have to remove the wiper from the frame, which is easy. The wiper snaps into the...

I've had good success with a decal eraser wheel. Works like a pencil eraser and shreds the old decal and removes the adhesive as well. Something like this https://www.amazon.com/dp/B00488DDB8/re ... TY6CQ7JHQ5