Search results

When it doesn’t work from the helm that’s the first spot I checked. 1 time it didn’t work the engine was able to raise from the side of the motor switch. The second time, that one didn’t do anything either. Thinking it might be the relay or solenoid. Neither worked after a full 8 hour trip...

Sorry for the delay haven’t had time to log in here in a while. I thought it was common but no where had the connector in anything larger than 14-16 AWG. I was able to find some online and got what I needed. Fixed it Friday afternoon and used the boat all weekend with no issues. Thanks all for...

Any idea where to find the piggyback/multi stack connector in marine grade for 10/12 AWG wire? Even new wire marine only has 14-16, stock wire I’m replacing is 10/12 AWG (yellow connectors), Grady hasn’t returned 3 messages on it (I get transferred to someone’s voicemail and no one has returned...

Thanks added to cart today!

Awesome, thanks! That’s what I thought

Good point! I was aware of this and luckily the previous owner kept everything in good shape so it’s legible, but since I wasn’t sure if I’d need to pull the boat and the river I’m in is one of the worst on the east coast for current I’d really want the second motor for docking to pull it. If I...

Yes great point! Once I was able to use the trim/tilt I moved onto the other issues (since the boat isn’t going anywhere until that’s fixed) but am keeping in mind I need to get back there once I get the panel back together. I was just happy to not have to leave one engine down for a week in the...

Spent some time today working through it all. Trim/tilt must have had an air bubble or has a small leak, but when I got to the boat it worked without touching anything. Will have to keep an eye on it and hopefully it lasts until I pull it to do a thorough check and maybe a rebuild of it if...

Have had the new to me sailfish 272 for a little over a month now. Boats amazing and have been using it at least 3 times a week. Recently I’ve been having electrical gremlins show up. One day, livewell pump and raw water pump stopped working. It ended up being fixed when I took the switch panel...

That’s exactly what I was able to do. I only have two currently but am going to pick up 2 more and replace the front ones. All worked out great with some life caulk and a good drill bit. Was able to install and use 2 days later…with no luck fishing but they came out nice and clean.

Perfect, thanks!

Sorry for the dumb question…but… when you say “run the drill backwards” are you referring to in reverse (loosen if it were a screw) or do you mean from under the gunwale up (reverse direction than the rod holder will be going in)? Sounds like a stupid question but wanted to clarify since I’m...

I had a 2002 F225 on my last boat. Bought it with some corrosion, ran it for a year no issues then did the exhaust update. Mine came apart easy and had not gotten to the block. There’s no true signs of of it gets to the block without pulling the block. Scoping only goes so far (discussed with...

Thanks for the tips, I’ll be attempting this Saturday so happy to hear as much advice as possible. These are being installed for giants/medium bluefin and I already have the rods and know the rod holders (same as my last boat) so I know the rod/holder combo works. I will be using a hole saw...

Great info! I have one 0* and one 15* degree I will be installing. I’m hoping to get it all laid out Friday/Saturday to see what you mean about the stock ones. I had a feeling that was the case but have never installed any myself before so wasn’t sure. I’ll be using bent butt rods with 130’s on...

Planning on adding 2 swivel rod holders to my 2000 sailfish 272. I have never added rod holders and want to make sure I do it right and not ruin the gunnels. 1. does anyone know if standard swivel holders will fit in the stock lee rod holder holes? They look to be about 2” bases and the backing...

The run home was great, lines off around 7:30am and in the slip I kept it at for the weekend around 4:30pm. Calm following seas/winds the whole way. Averaged about 22kts including the time in the canal which we didn’t have to slow down much for since we timed the current right. I didn’t get...

I’m considering selling the pair that came with my 272. Side mount telescoping 18’, I’ll get model later this week when I’m on the boat. I love how they look I just don’t or rarely troll and constantly go under bridges so theyll tend to be more in the way for my uses. I’m in NH so not too far...

It was nice to meet you too! John was a pleasure to work with and the boat was incredibly well taken care of, I am hoping to keep it in the same shape he did

After a few years with an offshore center console made the decision to get a walk around for the northeast. Closed Thursday on a 272 sailfish and spent the weekend on it including running it 162 miles ~8hrs Friday with my dad for a nice Father’s Day trip. Looking forward to many more weekends...