Search results

I have a 2006 F250TXR and there are differences between the 2006 and 2007.

Ditto.

Spray where you are applying the stripes with soapy water. This will allow you to reposition the stripes if necessary.

Very good info on the “Boatworks Today” YouTube Channel.

Here are the plans for the 56 gallon auxiliary tank.

All hatches, insulated ice boxes are above the waterline so they can drain directly overboard instead of into the bilge where the water needd to be pumped out. No fishy smelling bilge and keeps it dry.

If the mountings bolts are far enough apart you could get brackets fabricated to fit around the hardtop tubing. This is how I mounted mine. They are anodised aluminium. Still need to trim the bolts.

They are Lee's OH277T bases. They don't make them anymore. I have a set on my boat.

Another angle.

Really recommend a survey. A little money spent now could save big bucks in the future.

The 228 for the full height transom and central live bait tank.

Great spot for a day trip. I usually launch from Spinnaker Sound on Bribie Island. What fish do you chase?

It’s a nice looking boat. I like the helm design with increased area for flush mounting electronics. No more folding transom well. Without motors it’s only 225lb more than the 208 with 5” more beam and longer. I would miss the overhead electronics box and the centrally mounted live bait well of...

Prices for used 228s here in Australia have increased significantly since the 228 was discontinued.

You would probably need a radar arch. Then you could mount the rocket launcher. See link. http://www.fishwrecked.com/forum/custom-radar-arch

Might be useful. https://www.greatgrady.com/threads/paging-magic-bill-trim-tabs-you-were-right.34814/

Yep, that would be my greatest fear. Dinged a couple of props over the years. Not too expensive to get them repaired. These things though…$$$ if possible at all.

Have to agree. Yamaha aren’t going to support a product without doing their own research. Interesting to see if Yamaha’s performance figures are similar to Sharrow Marine’s. Wondering if prices will drop with Yamaha is doing the manufacturing.

Thay aren't a one size fits all, as the design of the cabin has changed over the years. I would contact Grady and find out what year range of hardtops will fit your boat.

My normal ramp (90% of the time) has a fairly shallow angle so that should be fine. On steeper ramps where the stern floats quite a bit I may have to drop the roller.