Search results

What kind of housing do you want to rent? Do you want the boat in the water all the time? I rent a house each year in Islamorada (Lower Mantacumbe) every year for 2 to 2 1/2 months. House is on a canal on Atlantic side. Many more houses on bay side. This is a quiet key (which we like). Longer...

I've done Lauderdale and the Keys that time of year for 20+years. Pompano Beach, Islamorda and Key Colony Beach. Mostly Islamorada. What do you want to do there?

My SD card reader (square one) is loose in the overhead box - you can see it next to the microphone cord blow the cover. There is no reason to ever remove the Active Captain card. Only one is permitted per "system" (not one per MFD). 8610xsv and 8612xsv MFD's. There is only the Active Captain SD...

Go to West Marine and buy a stubby VHF antenna. Good to have in your ASB in case you break the big one. You can get NOAA weather with a coat hanger for an antenna. Any boating friends with an antenna laying around? How about your marina? I would look around the last thing you did around the...

Garmin offers an external SD card reader. Plugs into the back of the unit and you can put it somewhere easy to get to. Mine is loose and next to my VHF. I have an Active Captain 32GB SD card in the back of one of the units and other slots are unused. The external SD reader has 2 SD cards I use...

Replace them with Starboard - Seafoam.

Mixing different manufacturers on a boat network can be a bit tricky. Especially with older equipment. NMEA 0183 is discrete wiring and more configuration. NMEA 2000 is plug-and-play. Then there are proprietary networks. Becomes harder to wire/setup/configure if you are not familiar with the...

The autopilot will have a magnetic heading sensor in it. The trick is networking the different manufacturers units. You should have an electronics guy go over all the setups and connections. Where are you located? Someone here on GG can recommend someone.

The Lowrance HDS 12 Gen 3 looks to be a current product. I'm going to assume that the chart plotter was replaced before you bought the boat. The puck on the hardtop looks like it's been there awhile. It's possible it is a Lorance Point-1 puck which includes a magnetic heading sensor...

Is this a new install? Did that compass rose ever work? First thing to try is setting the unit to heading-up orientation. To set the magnetic heading on a Lowrance HDS 12 Gen 3, first go to the Chart page and access Chart Options, then select Heading Up under the Orientation tab. For the most...

That is your GPS antenna. It connects to something. You must have more than a radar. A multifunction display maybe? Chartplotter?

I would put it on the walk around horizontal surface. That way you position the pump out hose vertically. It can be on either side. Don't forget to add a vent on the side of the hull.

You should not change the battery in an ACR ResQLink yourself; instead, it must be replaced by an ACR Certified Battery Replacement Center. These centers are trained and insured to ensure the device is properly sealed, tested, and fully functional after the replacement, which is critical for a...

Links fixed. [https://www.zoro.com/clauss-shop-shears-right-hand-8-in-l-18039/i/G3477336/[/URL] [https://www.zoro.com/clauss-shop-shears-ambidextrous-7-in-l-18516/i/G3621703/[/URL]

I buy Clauss titanium coated shears. Use them for bait rigging, general line cutting, just about everything. They will eventually rust. I throw them away at the end of the season. I also use the small Manley pliers. In the spring I put them in a ziplock bag and spray with WD40 or BPBlaster...

Sounds good. Sourcing things is a little different down under!

Perfection isn't that much harder or expensive to achieve. And you will sleep better. Done right - done once! Tanks should be insulated with nitrile strips glued to the tank with 3M4000. I also insulated the mounting pads. Water trapped between the tank and whatever is the securing material...

This is a long shot for you but I may repower next Summer. My F150 run like new with 2,500 hours on them. I'm taking them off to rebuild the transom. May move up to F200's. As always - where in the World are you?

Download GW owners manual from GW. There is usually a wire list with all the color codes for the various devices.

October 2007 purchased with 50 hours on new motors. Today 2,500 hours. So 18 years. About 138 hours per year. Boat is only used in FL for two months +/-. Haven't put in the water in NJ for years - just work on it! In FL runs are short few mile runs but the motors are my generator to keep pumps...