ACR beacon question

[Halfhitch]

I have an ACR ResQLink Personal Locator Beacon That I keep on the boat. The battery is overdue to be changed. Has anyone opened one of these up and changed the battery themselves? If so, is it a pretty simple deal with an easy to acquire battery or is it better to send it of to the maker?

 

[Hookup1]

You should not change the battery in an ACR ResQLink yourself; instead, it must be replaced by an ACR Certified Battery Replacement Center. These centers are trained and insured to ensure the device is properly sealed, tested, and fully functional after the replacement, which is critical for a life-saving device

 

[Sardinia306Canyon]

There are many informations if you google for ResQlinq battery change to find, including how to change the battery.
However, as above written, its a better idea to have it done by a certified company to avoid that the bacon does not work when you need it.
Chris

 

[Halfhitch]

Thanks for your wise recommendations fellas. There is an ACR Service Center about 30 miles North of me here in SW Florida.

 

[SkunkBoat]

see this thread https://www.greatgrady.com/threads/acr-resqlink-battery-replacement.35753/

 

[Halfhitch]

see this thread https://www.greatgrady.com/threads/acr-resqlink-battery-replacement.35753/

Thanks Skunkboat, I knew I had seen this before but couldn't remember who had done it. I am wondering if it is a hassle to get the registration updated. NOAA websites are always hard to navigate. Did you have any trouble?

 

[SkunkBoat]

registration is easy. They send you reminder when due. I get one for PLB and one for my EPIRB
Once renewed they send a new sticker in the mail.

Battry replacement is a no brainer if you get the pre-wired battery. You have to get the thread lock out of the phillips head screw. Don't chew it up.
And be careful to get the gasket back in place.