Search results

Thanks all … gonna scope it out this weekend. Anyone do it in the slip or pull the boat ?

My cables are getting sticky tight. Anyone here tackle that job or have it done before ? 2007 Marlin with F 250’s

Dremel tool, tape , sandpaper and waxed gelcoat would do the trick for the best match. You could mix your own or Grady sells it to match (somewhat). That small of a job I would mix my own.

... engine hours in conjunction with the price might entice the right species in the chum slick. IMO the two most important bits of info

Have seen many issues reported about the Fusion units. Rebooting and resetting etc. sometimes it works only to reoccur the next day. I have the MS-RA205 in a center console that never gets wet and was installed professionally. Boat is stored indoors. This year at start up etc. the only thing I...

Same deal here with the 4 group 27’s set up at factory. Had AGM’sand swapped them out for higher CCA Deka lead acid dual purpose. Working with my electronics guy and also my Yamaha tech. Will post up when we conjure up a solution

Anyone have this issue on your Grady ? I'm most likely drawing to many amps with a TZ touch3 16" MFD with 1k sounder 2 VHF radios Raymarine 12' and 7' MDF's Auto pilot and furuno GP 32. my guess is we're pulling 25 amps. Ok while running however too much strain when at idle or motors off. Anyone...

That's absofrigginlutely Horrible !! A sign of the times I suppose. No way I would tolerate that nonsense. That's some backyard chickencoop workmanship there. You would think in this day and age GW would have stepped it up a notch, build a more modern looking T top like Regulator's surfboard...

Correct ... mine are Yamaha's different manufacturers different procedures. Didn't the Yam F 350's have some sort of issue if you left motors up in cold weather residual water could get trapped and freeze ?? Older models maybe ?

My best guess would be to go with option two as Fish stated... The Scientists at Grady weren't forward thinking enough.

My humble procedure: I have a pair of 250's. At days end back into slip, tie up and shut down. Hook up both motors to a Y valve splitter we made up. Turn on water and simultaneously begin flushing in down position. Open beer. Start drinking beer while filling wash bucket with another hose...

Grady 33, off topic question : How about the recent weather this past week ?? :( Are we going to get a break for the sea bass opener ?

nice boat ... someone put the "High Shine" on that Mamma Jamma. Good Luck with it !!

My fear is some day the blue collar guys/gals will be pushed out to trailer trashin’ it mostly. Not that there’s anything wrong with being mobile. Some folks just like having the convenience of a slip. But at what cost are we able to tolerate

.... Although I like our Marina (alot) in OC it is privately owned, maybe on the higher end of the slip fee scale it is a great place and the folks are real personable. Hope it stays that way. I like the old mom and pop marinas over in the Bay and would hate to see them fall victim to the lure...

FWIW … I have owned five 3.3L Yamaha F250 outboards. One is stamped manufactured year 10/2006 it is on a 2008 Jones Bros I bought new and still own. Two more were on a pilothouse boat I purchased new (2007)and logged over 2200 hours on and sold to a guy who now has the meter approaching 3k...

Nice glass work repair on the transom. Too bad the Scientists at GW didn’t do that in the first place. What material did you use for that bang plate ?

Anything positive about this trend ??I’m seeing a lot of it lately. Hasn’t happened to our digs yet. What is your experience ??

I must say that is a Beautiful new top !!

Hey Dan do you think we could get 500’ in that compartment ? I’m looking at freshening up mine too . Pat