Search results

I had one replace last yeanr and they drilled the hole but also cut a straight hole straight to the edge of the glass. They said it does not in any way weaken the window and it protects it from breaking when drilling the hole. This w.as made of tempered glass. Seems to work fine a year later

The auto float is damaged or the if you have the lever type float something is stuck in it. I have it happen once insmall awhile and it is usually a small piece of flotation material that gets in there. The switch will not shut of the auto function of the pump -

I had a Gulfstream with a 2004 F225 and I thought it had enough power - it is always nice to have more power but that go into that deere a lot of factors that decision- budget, fuel, maintenance etc. My guess it you may be over propped. I would check with a dealer - that engine should be able to...

overhead box on a Sailfish uses these hinges - get the right detent for the right box Southco Electronic Box Hinge 115 degree detent

The newer Isotherm Refrigerators are now AC/DC - they automatically switch when the boat is connected or disconnected from shore power.

This [lace has them too https://www.obecoinc.com/

One other thing if you ge new - there is a very small black washer that goes on the hose where it connects to the faucet body. I lost it in the bilge while practicing on being a contortionist inside the refrigerator cabinet space. - The washer was not available anywhere I searched except...

I replaced two in the cabin this past summer - the ones I removed were easy (2004) to remove. They actually came out by turning the nut at the base of the handle. I looks like yours might be the same - New ones have changed and they were installed similar to a household faucet, from below - As...

Search can be tricky until you get used to it. Go into search and click advanced - in advanced just fill Key words section IE in your case Groco. and search I know from experience bc I recently had to replace mine :)

I may de one out of some quick conects and a hose splitter and it is perfect for twins - not sure the water pressure at my marina could handle trips.

I never understood why the engines need to have the bottom a couple or inches in the water. When I see my same model with twin Suzukis that stay dry when raised. So is it an engine issue or a boat issue.

I generally clock 60 - 100 hours per year - lot depends on the weather. This past summer May and June were close to a wind/washout so we had close to 60.

That transom cap is pretty good shape from other that have been posted here. Considering the potential expense that could be incurred from a wet transom , it is is better to be safe than sorry!

Welcome - I will occasionally start receiving ads and the fix is to log in - for whatever reason my lap top will log me out after each visit - quick log in and ads disappear

I used this stuff - Globalcom Fiberglass Boat Repair - got it on Amazon based on arecommendation from a few folks on GG. Mix you own and it is very easy. Base product is white add less than a pin head of brown tint and it matches perfect. I did some small repairs and unless you are looking for...

Sorry, Just saw you were looking for a latch for the vent window. This is what i used on Sailfish - Seadog Side Vent Adjuster Kit - they are readily available. I think i got mine on Amazon

Not sure if it actually stretched - its possible it just allowed pulling the panel along the track for a better alignment with the snap.

You can make make an template from the other window and bring it to a glass company - It's not cheap but they can easily replicate. some peoplle have cut there own from plexiglss. Hope you have the bracket because that is the tough part to find

Great trip and photos- Enjoyed the trip since we are on the ocean, we don't get a chance to see river and lake boating.