Search results

I'm surprised you ran into shops hesitant to hang 300s on such a big boat, but yeah, as you pointed out, grady will say no. (and potentially with good reason, doubly so since the transom on half of these is rotting away) Down here in FL I had no shortage of shops who would have been happy to...

I'm in the middle of a repower (with new steering cyls) and casually mentioned to the tech that I had pretty stiff steering and hoped this helped. He was like "oh yeah, your port motor was really stiff, even after we disconnected everything it didn't move." He acted like this wasn't...

Bumping this thread, ironically I've been searching on outboard toe but didn't find this thread until I had already fired off a question to grady. I'm repowering my 330, and I was surprised to find that my motors aren't parallel, currently the leading edge of the bullets is 0.5" closer than the...

Also curious where everyone has installed the steering pumps, I have one I never got around to installing, it is tight but easy to access behind the holding tank, or plenty of room but hard to access in the bilge at the transom. For the OP, my 330 also takes a bit of muscle to steer but isn't...

Selling my F300s to repower with.. F300s - ~1100 Hours - 25" Shaft - DEC Digital Shift/Throttle - Excellent results from oil analysis for the last 200 hours - Professionally repainted last year with new factory decals, look like new - New Yamaha Canvas motor covers - Water pumps, timing belts...

I don't think you should be having this issue with a brand new "top tier" boat. I'd compare with some other new 235 owners and see where theirs end up. Even on my 20 year old 330, the drains are a couple inches above the waterline - and good thing, too, because after 15-20 years, the hoses...

I am not 100% sure but I'm 95% sure this is a fit, oddly I only had one in my amazon history so I must have bought the second somewhere else. https://www.amazon.com/gp/product/B0009TPXCW/ I painted mine with bright aluminum spray paint and they look great a year later. My recollection is that...

I'd have to double-check specs, but I mounted a lightweight 32" Toshiba smart TV from best buy on the wall to the head, above the two net holders, used a $12 ultra low profile square mount from amazon to mount it. Worked great, I am sure I replied to a thread here with some details a couple of...

Wow, that boat has had a lot of custom work done to it. On repowering an older 330, there were a number of smaller changes along the way, and it's not just the transom. In my early 330, there is even a factory 'fix' to reinforce the midships stringers. Remember that in the early 2000s they...

I just wired a rule mechanical float switch (fused) attached to a marine horn mounted inside the hull. Much simpler, easy to test, and no worries about someone accidentally shutting it off. If I HAVE to shut it off, I can just pull the fuse.

For my Grady 330, I ordered the Zoro D shaped weatherstripping referenced above - part # G4338135. This was adhesive backed, which I did NOT need - I left the paper strip on, which I may have some regrets about later, but it stuffed into the channel perfectly and looks like it should seal well...

While I understand your goal, unless Grady sold the switch panel you are looking for with the model # you need already painted on (which is possible, call your dealer) then I don't think you are going to find an exact match. On the other hand, there are any number of materials you can have it...

This is one of those difficult questions that nobody likes answering. I've had two 30' boats painted, and ballpark paid $5-7k for hullsides alone. Both jobs came out excellent, both shops were experienced at spraying awlcraft but were ironically both body shops that had branched out to boat...

This color looks remarkably different in different lighting. The shot I posted in the other thread https://www.greatgrady.com/threads/330s-or-other-walkarounds-with-painted-hulls-lets-see-your-pics.34028/#post-238764 shows it as much lighter. Oddly both pics are accurate, sometimes it looks...

I forgot to follow up on my own thread - I went with awlcraft stars and strips blue, and the boat came out fantastic. This paint is really interesting and I THINK a near match to the same color grady is offering factory now - sometimes it looks light blue, sometimes it looks darker, at sunset...

I'm surprised you say the 360 is significantly more expensive to run - since I average about 1 MPG in my 330, the 360 was that much worse?? Now I'm terrified. LOL.

I just did mine on my 2002 a couple months ago. People said they could get in through an access plate on the inside of the transom wing. I put an 8" pie plate there and I could just barely brush the inside of the thru-hull fittings with my fingertips. So now I have a pie plate that goes...

I'm not recommending this ladder or this vendor (just stumbled across in a quick google search) but there ARE options out there with "Extended" hinges. https://www.marinedepotdirect.com/stainless-steel-fold-out-with-grab-rail-over-platform-telescoping-ladder.html

Just picking my 2002 up from the paint shop this afternoon. Boat was already bottom painted and would have been prohibitively expensive to remove/redo. I've used vivid white bottom paint before and it's a much cheaper alternative to keep the unpainted look for a lift kept boat. I was back and...

The "new" grady vents are actual stainless, from some custom fabrication company. But yeah. I'm with you on the price. Not that they aren't fine pieces of trim - but way too expensive considering what they do. My thru-hulls were pretty bad as well, major pitting and brass showing through...