Search results

New plugs made the boat fire up like a champ. Thanks for the input. I will buy a digital torque wrench for the future. It’s not a money thing, I just have not learned to trust them yet. We’ve all stripped stuff and broken bolts and such. That’s when we learned that too much was too much. But I...

How easy is it to strip the plug threads on a Yamaha outboard. I’ve done plenty of mechanical work in my day…but I don’t have a torque wrench and it always makes me nervous. I used a 8” ratchet and deliberately thought not to overtighten….but I don’t want them to vibrate out. Am I being overly...

Thanks for the thorough advice, I think I will try some sealant just to be safe. I’ll also consider buying a replacement seal as a standby when I change the impeller next. It’s nice to service this stuff myself so I do it more regularly and know whether anything was suspect or not. The last...

Harbor has fresh water hose that I attach to rabbit ears and follow up with a longer run time at home using same rabbit ears. Do I need more

thanks for the quick response. I think you’re right. There seems to be a rubber dam or seal between that cavity and the impeller housing area. The edge in question looks indented for a seal, but I don’t think it needs or came with one. Thanks again for the confirmation

I changed the impeller on my 175 ox66 two stroke and everything went well. But when I went to reattach the lower end, it looked like it might be missing an exhaust gasket with a kind of 6 sided shape. I ordered it based on the Yamaha schematics, but that one now appears to be higher up in the...

hey thanks for all the great advice. As you all said, it looked way worse than it was. Looks like the oil was transmitting through the small (1/8 inch) tubing off the backside of the engine mounted oil tank. Leaving the key on kept the pump running until it dumped a gallon of oil. Lol. I’ve...

Thanks for the input. I will pull the air intake and take a look. I suspect the oil transmitted through a line of some sort. I’m also curious whether it might have leaked out the reservoir cap and dripped into the air intake. One way or another I will have to check that lower carb and hope for...

I tilted my 175 HP OX66 all the way up...and left the key turned onto accessory. About a day later I noticed the stinking thing had pumped probably a gallon of two stroke oil and had leaked onto the ground. The real surprise to me was that there is oil in my air intake on the lowest carburetor...

dang onoeric you’re good. Few people would recognize that as a Cortez. But I think I noticed you live somewhere in SoCal so you know those boats. Thanks for the advice

The boat came with a tow strap that floats behind the outboard. I’m just pulling kids so I’m not really worried about wake or performance. But wakeboarding and such requires a lot of start and stop and in and out of gear. I don’t know if outboards are meant for that type of use. My nautique is...

Stupid question. Is my Yamaha 175 saltwater series outboard (1996) suited for pulling kids behind my Grady 192. I’m new to outboards and just don’t want to abuse the thing with going in and out of gear and such. I have a Nautique lake boat with an inboard and I’m thinking about selling it if my...

Exactly the sort of info I need. Thanks. No more guessing how much fuel we’ve got

Ok thanks. I really appreciate it. It seems simple but boat projects can easily get complicated. Thanks again

My 1997 tournament 192 needs a new fuel sending unit. Obviously it’s just a few bolts and couple of wires. But I’m wondering if everything goes back together ok, or does it crumble in your hands. It’s the original fuel tank. Anyone replaced one of these. Thanks

Wow. Great advice. I really appreciate it. I will replace oil injection filter and continue to monitor its performance. I'm also going to fine tune throttle and shift cables...why beat up a good condition outboard. Also, will switch to a cheaper outboard 2 stroke oil, and replace scuppers. With...

Thanks for the heads up top jimmy. I didn't realize there is a filter in that oil injection unit. I will certainly replace it. Also, I didn't realize that the scuppers were an easily replaceable part...I will look for them on the internet. I will also have that linkage looked at, or replaced so...

Thanks for the response. I think you're right on being decisive with the shifts. Our backup fire engines at work have non-synchronized manual transmissions. We often say "drive it like you stole it" because hesitation causes grinding. I'll see if a little more gusto cleans up the shifts I...

After literally five years of searching we finally found a ridiculously clean 192 here in California. Let me give you some details while the purchase is still fresh and Im still in the honeymoon phase. The boat is a 1997, so I was obviously very concerned about the million problems that can come...