Search results

I don’t know what to tell you. That type of caliper is literally called a vernier caliper, whether it’s SAE, metric, or both. No more bad engineering jokes from me. I’ve gotten lazy over the years because 95% of the time I use digital calipers at work. The other 5% of the time is my own...

I was just making a joke because trying to determine 1.0 inches from 0.875 or 1.125 won't require reading the vernier, but that Harbor Freight caliper is exactly a vernier scale :) https://www.physics.hmc.edu/~physics50/wp/index.php/calipers/

Your F150 is a little more efficient than my 175 carbureted 2-stroke. For safety factor, I always use 2.0 mpg for my planning calculations, but we typically get about 2.3 mpg. And I agree... I get real nervous when I've burned more than 60 gallons... though I've made it to 70 without stalling...

But then you have to spend the next 2 hours trying to figure out how to read that vernier scale... :D

After they make their quick showing around the Channel Islands, they'll settle in at the Tanner and Cortez for the rest of the summer and fall, which is when I have my 2.5 day trip scheduled... fingers crossed... The farthest I've been in my 208 is about 12 miles west of San Clemente Island...

I may try Sunday launching from Dana Point and working towards the east end of Catalina to see what we see... This is exactly what these bluefin have done the past 2 years in a row moving north around this time. Last year mid-July I was chasing foamers between the 14 mile bank and 267, and 2...

Ha! I didn't even notice it there in the pic. Just read your report on BD. That's an absolutely amazing story! Fish of a lifetime! I'm 0 for 4 on big bluefin on my boat... one hook pull, one chew off, one that went squirrely boatside and sawed itself off on my motor, and one moron boater who...

Nice work! What did he eat?

Yep, what Glacierbaze says. I'd check it with the engine running too. LED's are very sensitive to current and voltage and don't like it if they are overpowered for too long. Your engine charging circuit probably jumps the voltage at the light to 14 or 15 volts if it's not regulated.

I can't add much to this discussion, but a trick I've done in the past when I got an overheat alarm was to hook up the washdown hose to the motor flush fitting and run water through the block with the motor off. Maybe doing that would speed up the 30-45 minute wait time, and if it did, that...

Yeah, it's not the fastest process... in fact really quite slow if you rely on a gravity feed through a 3/8" hose. Repeated pumping of the primer bulb makes it go faster... that's your "manual mechanical" fuel pump ;-) Most anti-siphon valves require a vacuum of about 1.5 inches of mercury to...

The unfortunate part of outboard powered boats is the easiest way (though maybe not the fastest) is to disconnect the fuel line just past the primer bulb and use the bulb to prime a siphon. Easy access to the fuel lines in many cases. Just like in vehicles, you can have locking gas caps, but...

Someone else suggested it to me when they saw me scrubbing off tiny barnacles at the launch ramp wash rack.

This is going to sound really stupid, but I've used Desitin diaper rash cream on my trim tabs. The longest I ever keep my boat in the water is 2-3 weeks at a time, but if I apply the stuff at the beginning of the season, it's still there and effective at the end of the season. Is it the best...

My experience fishing offshore in southern California is that while there is a lot of bickering on the radio, especially when fighting over fish, for the most part people look out for each other. First story: I was out fishing albacore out of Ensenada, Mexico with a buddy in his 20 foot...

That's every weekend in San Diego! Last year we pulled up to a school of foaming bluefin in the 70-100 lb class. I cast a jig right into the middle of the foamer and was instantly bit... line starts peeling off my reel and here comes another boat flying in to get into the middle of the action...

Don't forget paravanes, Dennis... ;-) https://www.powerandmotoryacht.com/maintenance/paravanes-stabilizer-option

Speed and fuel savings... that's tough to answer because it depends on conditions. What trim tabs allow you to do is stay on plane at lower speeds and level out the boat due to conditions, whether that be where passengers are sitting while underway or wind and chop direction. Things like getting...

Ahh, I missed the Canada part. That does change things... especially if the amount of cash is >$10k crossing the border...

Wait, the USA has turned into a 3rd world country where cops pull people over and confiscate money with no warrant and no probable cause? Maybe I'm naive, but if you're worried about that, I can see why you may have scared the seller off...