Search results

The electronics on my boat are circa 2018. They are all RAYMARINE. AXION PRO MFD with LightHouse charts, CPT-S transducer, autopilot & wireless remote (control head looks similar to the current P70Rs), QUANTUM RADAR, FLIR and Ray73 VHF They are all very user friendly from an interface...

Fill them (see note) with a good filler or 'glass & resin, leave a dimple for gel coat or plan to drill down an 1/8", then mix up gel coat and "paint" the gel coat in/on with a good quality artist's brush. Take your time and don't make it worse by trying to make it perfect. Keep in mind you...

1 - I would 5200 in some stainless t-nuts underneath the "mounting flange" on the deck that aline with the exiting holes on the hatch. 2 - I would clean the perimiter edge of the opeing and the peremiter edge of the hatch really well. 3 - I would screw down the hatch with quality stainless...

This sort of thing is right up my alley. If you post some pictures, I and others could come up with some ideas.

Hi, Folks.... Check out my photo of the pump. At/on the top of the pump, on the right it appears there are wires going into the pump (looks normal). THEN...look at the bottom of the pump....there appears to be some sort of electronic device (see red wires behind it) that perhaps is the valve...

I would suggest disconnecting the hose near the wiper to see if water is making it that far. If it is, then the sprayer is clogged. If it isn't then the issue is further upstream.

ok.... here goes it.. 1. The fresh water switch must be "ON". 2. The strainer must be clean. 3. The hose must not be kinked nor squished by the spring on the wiper arm. 4. The tiny holes on the sprayer must not be plugged up. Some pics...

Do you have a raw water head?

I will try to remember to check tosee exactly how mine operates and take some pics.

BTW...the fresh water pump needs to be "ON"

I had this issue a few years ago and it was a small strainer on the fresh water. My 2018 306 has a little strainer near the fresh water pump. Mine is behind the lower hatch inside the console. It simply unscrews for cleaning.

there is a tuner called NIZPRO that tunes them. Personally, I wouldn't do it.

I think you are in the ballpark, but perhaps more-so in the parking lot.

I have replaced a bunch of my 2018 306 Canyon. Pretty simple once you access them. I used a needlenose piers and screwdriver to pull/pry the old one out the hose after lossening the hose clamp. Installation is simply the reverse. On my tackle station, I had removed my tackle drawers and frame...

Will do.. I would even be willing to ship one to you, but I doubt it would be cost effective...lol

There are also two 226 models for sale on Craiglist Boston Boats

Not a mid 90s...but well below your budget. https://boston.craigslist.org/sob/boa/d/plymouth-grady-white-seafarer/7861684855.html

I have not been able to find just the rubber insert. My local NAPA was able to order one for me (Chris...see link below), but it was the wrong width. The one from NAPA was 8 MM and the blade on my boat is 6 MM. I just ordered these. I will report back if they fit/work...

Hi, Here are two pics. One is of where the blade connects to the arm. At the bottom, you will see two little "balls". These are where the water squirts out. They can be positioned/repositioned by putting a pin or something in the hole to move the ball. The second pic is a close up. There are...

ok Now, all I need to do is remember to take a picture when I am at the boat tonight.