Search results

That's a good idea Dennis... Could just fill the live well with fresh water at the dock and use a regular AC powered sump pump (or DC if you don't have a generator) -- they have garden hose fittings already. Get a 25ft ZeroG hose and store the whole thing in the live well.

I think a fair few folks leave them open all the time -- no criticism intended, but I'm not sure they realize how many boats sink at the slip because of a failed hose clamp or leaky hose. With the seacock open the only thing keeping your boat floating is a hose and some clamps in your bilge that...

I have an '03 and I'm pretty sure there's no plastic in mine because I often get a bit of spray into the cabin when I'm washing. I'll look at it more carefully, but wondering if there was some protective film that was never removed or something like that? Or someone put some plastic in to keep...

Installed this on my 330 — very easy DIY on the starboard side because you have access from underneath from the live well. I put in an inexpensive Garelick 9” pedestal that only swivels. The seat is an mid-tier Taco Marine that’s no longer made — I have arms for it too butI bought them...

Had the same problem on my 330 -- in a fit of pique I WD40'd the heck out the area under the plastic covers to the tilt steering. Took quite a few tries, but I finally got the right spot and the squeak went away. Still not sure what was rubbing.

Wow - that part is pretty thick stainless steel -- how did you bend it?

Search the forum - others have done it. I had my marina do mine last year and I replaced the hoses too -- worth doing because if those hoses leak it can sink your boat. My marina ended up cutting two access holes on the transom and putting pie plates in. I think some others may have managed with...

I posted a thread earlier, but I opted to add 4 clamp on holders on the hard top supports alternating with the factory welded ones. I'm 5-8 and there's no way I'd be able to get rods in and out of hard top rocket launchers without climbing up on something. I know I'm not tall, but that boat...

For what it's worth, these replacement blades fit my 2003 330 Express wiper, though I am the 2nd owner so I'm not 100% certain the wiper is the original.

I love my FP which is still the original in my 2003. But, if/when it dies I will almost certainly replace it with an inverter (and hopefully lithium batteries will be pretty standard by then). However, we rarely if ever turn the air conditioning on or use the hot water heater, so my main use...

Very pricey, but I highly recommend the stabilized binocs (I have the Fujinon). I find conventional binoculars very hard to use on the water because of all the movement.

I ended up adding 4 holders to the hard top supports to use for this exact issue... https://www.greatgrady.com/threads/easy-addition-of-4-rod-holders-to-330-express.31013/

I've also not replaced the screws after removing a bunch of bolsters for cleaning and refinishing with SEM vinyl paint. I figure if they move around too much I can put them back. re: leak into the head, you might be getting water in under the rub rail at the deck to cap joint. I had to reseal...

Just installed one of these on my 33 Express. I did a bunch of research and felt that the Black Oak's were really good value. Hopefully it will work well for many years, but definitely great out of box. Note in my opinion you really want to mount it so that zero light hits any part of the bow...

I added it to my 330 last winter and I have to say I really like it a lot. My buddy has a newer Canyon 336 (same hull) and I was always jealous of the power steering. Definitely makes docking easier (my wheel already had the Edson knob), and it also makes the boat less tiring to drive when I'm...

For what it's worth I use my FELL MOB every time I'm out. I often troll solo, and if somehow I fell overboard (unexpected wave when I was reaching out to untangle a line or something) I'd really hate to be watching my boat motoring away from me at 5 knots... I suspect all new boats will come...

Hmm - that's a pretty wet spot. You may consider moving it, especially if it's been damaged by water.

Ugh, that sucks. I think your only option is to fabricate something to fit, but the lip is pretty thin... Maybe you can borrow one, make a mold, and do a new one in fiberglass? A decent glass shop could probably do that, or could make a decent DIY project. Or maybe you can modify the opening to...

You might want to try bringing a handheld VHF on board to see if you pick up the same interference on that. If so, then it's your autopilot pump that's transmitting the noise and may be defective or have some other problem...

I used a 12" stainless steel mount with an integrated all-around LED light from a company called Battlewagon: https://battlewagonmounts.com/products/a124-12-aft-leaning-radar-dome-mount-with-4-degree-down-angle I figured higher was better, but the 6" mount would have worked fine as well. The...