Search results

  1. Jzeno186

    2007 232 Gulfstream prop selection

    I am repowering my 232 with twin 2018 200’s and curious what props people are running. Thanks !
  2. Jzeno186

    Adding a Fuel Bladder -- grounding

    Cool thanks for the help. I do not have shore power. I am 2 hours away from my boat and I’m not sure if I have a grounding stud but if not I will connect to the negative battery post.
  3. Jzeno186

    Adding a Fuel Bladder -- grounding

    So green and black can go to the same negative battery post?
  4. Jzeno186

    Adding a Fuel Bladder -- grounding

    I am transferring gasoline from an ATL bladder with a 12v Fill-Rite pump. There are 3 wires with alligator clips , Black, Green and Red. Power ground and bonding.
  5. Jzeno186

    Adding a Fuel Bladder -- grounding

  6. Jzeno186

    Adding a Fuel Bladder -- grounding

  7. Jzeno186

    Adding a Fuel Bladder -- grounding

    What do you recomend I connect it to?
  8. Jzeno186

    Adding a Fuel Bladder -- grounding

    I just purchased a bladder and a fill-rite pump. All my research led me here. I have a 07’ 232 Gulfstream and just wondering what the final consensus is for the green bonding wire from the pump before I use the bladder? Thanks !
  9. Jzeno186

    Gulfstream fish table

    i plan on installing Seasucker mounts to the bottom of my fillet table this winter so it is not permeant
  10. Jzeno186

    2006 232 Gulfstream w/ twin 150’s (not affiliated)

    I have an 07 pretty much identical was looking for a while until it was re posted on here, returning the favor these boats are hard to find.
  11. Jzeno186

    2006 232 Gulfstream w/ twin 150’s (not affiliated)

    https://cataumetboats.com/boat/2006-grady-white-232-gulfstream/
  12. Jzeno186

    2006 + electronics upgrade

    I ended up going with (2) 943xsv’s
  13. Jzeno186

    2006 Yamaha 150txr steaming from exhaust port

    I haven’t checked but I will!
  14. Jzeno186

    2006 Yamaha 150txr steaming from exhaust port

    Correct but I have twins and only 1 motor is doing It and it is a new issue.
  15. Jzeno186

    2006 Yamaha 150txr steaming from exhaust port

    So I have temp gauges on both engines. At idle the are dead center, up on plane they go 1 dot past center and usually both at the same time, once I back off they both return to center. Each motor is consistent with rpm a temps. It appears to only do it at idle.when it’s cooler out both engines...
  16. Jzeno186

    2006 Yamaha 150txr steaming from exhaust port

  17. Jzeno186

    2006 Yamaha 150txr steaming from exhaust port

    I don’t have a video of my engine. I checked the oil which looks good, not watery level hasn’t risen. It does it at idle throughout the day. I found a video online of an engine doing the same thing but cannot post a video on here ?
  18. Jzeno186

    2006 Yamaha 150txr steaming from exhaust port

    I have twin 150’s I recently noticed the port motor has steam coming from upper exhaust port. I changed Tstats and Impeller with no change. Oil level is same and is not milky. What can it be ? Thanks!!
  19. Jzeno186

    Yamaha F250 is putting a white smoke (allmost looks like steam) from the exhaust.

    I’m getting water vapor out of one of my Yamaha 150 4 strokes. Just noticed it and appears to be at low idle. I changed thermostats and impellers and I’m still getting it. Going to change poppet next.
  20. Jzeno186

    What have you done to your Grady lately?

    Thanks! I’m excited, it needed it