Search results

Yes they used to offer a bundle with GO9 & 4G radar. It depends on which model GO you have now. It needs to have a yellow 5-pin connector on the back for input. FYI Navico produces Simrad, Lowrance, and B&G products and for the most part they can all network with each other in comparable model...

So my son is currently living in the Seattle area. I'm thinking about visiting and taking him on a charter. Since Utube loves to keep you seeing ads I've watched a bunch of suggested fishing vids, some Puget Sound and some Vancouver Island, one that piqued my interest was jigging for squid to...

I recently rebuilt my original Ongaro mini twin. There was a mud dauber nest on one side, I don't think I could've packed much more crap in there if I tried. The other side had some miscellaneous stuff as well. As Skunk mentioned, the electrical contacts are an area of concern. They are like an...

Here's the ones from Boat Outfitters.

Sold to Fish-On

Msg sent

Used, works perfect. Purchased from a user here that carried them, very little actual use. Light scratches on the dome cover visible in middle pic as a shadow. $30 shipped U.S.

I did one in my 96, pretty straight forward. There was a little shelf I cut a notch out of to gain access to the hull. There are a few good videos on youtube for the installation as well. Good Luck!

Yea I'm definitely going to be applying sealant underneath the flange of the cleat. The way you describe the load bearing is pretty much what I was considering. There are 2 regular nuts on the rod along with the nylock that's why I'm thinking one is up at the top underneath the deck, unless...

The company that removed my surface hardware went out of business after the owner died, I've been slowly piecing it back together but had a question about this particular part. There are 3 nuts and 2 flat washers on this threaded rod. As installed is there a nut and washer at the top underside...

Another option to consider is the 6YC Information station. I had 4 CL gauges on my Gulfstream when I got it, the 6YC gave me enough room to mount a 7" MFD on a panel below it.

I connected the Yamaha network to my N2K network buy getting a blank plug that fit the multi-hub connector, and cut one end off of a N2K drop cable. You only need to connect the signal wires, DO NOT connect the power wires.. Then remove a terminator from the multi-hub, plug your new connnector...

My '96 GS came with a sunbrella cover that goes from the base of the windshield to the outside edge of the transom, I have a pic of the front section but not the whole thing

I had pretty good results with cerium oxide and a wool pad buffer. Some of the spots are permanently etched in the glass but the end result is a drastic reduction overall. Good luck with it!

You can try Marine Glass Specialties for the seal between the frame and glass. For the one between the base of the frame and hull use adhesive 'double D' weather stripping. I reused the flap-type seals for the vents since I couldn't find new. Good Luck!

One can dream, looks like it's the pictures of the 08 232 for 117K by mistake

Mine was about 6K, but that was 2018

I too read about the hit or miss aspect of Venture and went with Owen and Sons. GVWR of trailer 11320, minus trailer weight of 1796, equals 9524 capacity. I doubt if my boat will ever weigh 9000 without someone on board, so Im comfortable with a 1/4 ton margin.

The axles and tires have a lot to do with GVWR for trailers, heavier rated axles can carry more weight. Which one is right for you depends also on how you use the trailer. My GS weighed in at ~8400 lbs with half tanks of fuel, I tow about 1K miles a year, I went with the heavier trailer.