I have a 232 gulfstream 2008 with twin motors. I have a thru hull transducer B175HW. Where would be the best place to install this? the ducer has a 20 degree.
thru hull location 232
- Thread starter joechiro30
- Start date
It won't be any different than any other boat - the directions that come with it will tell you all of the things to watch out for... obstructions such as strakes, etc. Also anything that would disrupt water flow such as other thru-hulls forward of your location.
There's no magical/one best location and there's nothing special about the hull that dictates a specific location.
Look iniside the boat for a good location where you can access it easily and compare that to the exterior. Doing that will tell you yea/nay.
There's no magical/one best location and there's nothing special about the hull that dictates a specific location.
Look iniside the boat for a good location where you can access it easily and compare that to the exterior. Doing that will tell you yea/nay.
Last edited:
Denko
GreatGrady Captain
In my 96 GS I installed that same xducer starboard side in front of the water pick up. There was a shelf there I think for the oil tanks for the original 2 strokes. I cut a section out to gain more access. Works excellent
Last edited: