Search results

Rhodan trolling motor

I used 1 36 volt battery. So far so good. I use the charger that came with it and just charge the battery back up while cleaning the boat up after a trip. I have had zero issues with this setup.I installed a in line battery switch and 50 amp breaker .

I installed the 84 in 36 volt on my 86 Sailfish. Only came off anchor mode a few times in 3 seasons due to big swells. Pretty happy with performance in high current .

Bump

Bump to the top

Price reduction.Transom re done and bottom soda blasted prior to my ownership in 2013.Hatches recored 2014,Main fuel tank 125 gallons replaced 2017,repowered with 300 G2 etec 2018 showing 440 hours ,warrenty good until March 2027 ,5 year/500 hour service performed last year 2022,new electronics...

Etec owners group is a great resource for your questions. I am also a member. 2018 G2 300 .

Ran into the same issue on my 25 sailfish. Removed the wipers. I keep windows clean and apply fleetwax several times during the season.Water beads up and visabilty is still good. Also clean eisenglass with Bo shield 210 and apply fleet wax. I think it works well.

Hey. I have the same boat. 86 Sailfish cutout transom model. Are you running twins or a single? When i had twin 200's and if running offshore i always ran the aft tank first . After 50 or 60 Gallons would switch to the main. Lots of weight back there with 75 gallons of gas,two batteries,and two...

I did. 300 Evinrude G2 on 25 Sailfish open transom. Cruise at 4600 rpm . 1.8 mpg . 13/14 gph at 24 /25 knots.

Yes lots of weight back there. I had 200 etecs on open transom model. With two batteries and 75 gallon aux tank and two guys fishing I thought it was way to heavy . Replaced the twins with a single 300 G2 Etec and moved batteries forward outside of helm chairs. Very happy with performance and...

check fluid level in pump. clean all electrical connections on dashboard control switch and quick disconnect connection.

Hey Skunk. How deep for Seabass this time of year? Asking for a friend.lol,

Is the deck just screwed in like all the other Grady White boats? I have the same model and replaced fuel tanks. No cutting of decks at all.

I did mine last year. 86 sailfish. SP Sheetmetal in Dennisville made my tank. I am in west wildwood. Contact me if you need anything.Drew Ryan

I repowered a 86 Sailfish with a 300 G2 Etec. Much better boat without all the weight in the back.

I replaced a 125 tank on a 25 sailfish. Make sure tank is near empty or empty. Came out easily by myself.

In March I used SP Sheetmetal in Cape May Court house NJ. On time , Fair price and local to me.

Hi. I repowered my 25 Sailfish cutout transom from twin 200 07 etecs to a G2 300 Evinrude. My main concern was to much weight in the back of the boat.I think the boat is better balanced and performs to my liking. Cruise speed is 25 to 27 knots depending on conditions. The 350 Yamaha should work...

US Navy. 1977-1981. Subbase Pearl Harbor Radiological Controls. USS Cimmaron AO 177 . MM2. Great experience in my young life.