I looked at Genius' website and they show 2 banks, 1 to each battery, in a parallel connection. Good to know.
https://no.co/support/understanding-batteries-in-parallel-vs-series
I need to replace the onboard charger on my 2006 Sailfish. I have 3 batteries onboard, 2 in parallel for starting starboard engine and house, and 1 battery for port engine and gauges. Can I use a 3 bank charger and run 1 bank to each of the starboard batteries or do I use a 2 bank and use1 bank...
New wire is building me a panel right now with blue back lit switches. At New Wire's suggestion, I opted for the optional dimmer switch in the lamp feed to lower the intensity. Guess I'll know how it's going to work in a week or so.
New Wire Marine for a dash overlay. If you know what you are going to install, they will cut the openings when they cut the panel. https://newwiremarine.com/
Yes, mine looks identical to the 255, except the winch is raised on a pedestal about 1 inch or so
How large a winch did you install? How does the starboard handle the load?
I'm looking to replace my windlass on a 06 282 Sailfish with a Profish 700. The present windlass is installed over the anchor locker on a raised pedestal, which is too small to mount the profish on. My idea is to remove the pedestal down to the hatch level and cover the hole with either 1"or 1...
Is there a reason GW uses the semilunar seat bases on the helm seating? Can they be replaced with a round base? Looking at replacing my pedestals and sliders with new Garelicks, but they have a circular base.
Thanks for any advice.
Hey fellow GW owners,
I am closing this week on a 2006 282 Sailfish and want to retighten/reseal the rub rail. Suggestions? How hard is the rub rail to remove and replace the center section that covers the screws?
TIA,
Rick