Search results

Trilux 33 sprayed just at the angle the water sits on the lower skeg.

Awesome, I am copying the link as we speak and sending it to the fiberglass shop.

Mudwasp had a post on here that he was able to find the rub rail and insert for his boat. I have pm'd him. I have a 1988 Offshore and my fiberglass guy installed a white insert over the navy blue rubrail. I don't like the look, it marks easily, and it can be pulled out with my fingertips. He...

Mudwasp, would you happen top know the size or model# rubrail and insert that Integrity marine gave you. My fiberglass guy says the original rubrail and insert is not made anymore and gave me a white insert over the navy blue rubrail, and it looks like a$$. I know this is an older post but any...

Gentlemen, thank you all for your help. Works perfectly, tested yesterday. Btw, running power to the gauge from the toggle switch and not ignition. You are geniuses.

Yes, I understand but I like this modification previous owner must have done, this way I can see fuel capacity without having ignition on or at refueling. When the switch is down the LED lights up in the down position, when UP the led lights the up position. Also just seeing or feeling the...

Thank you all for your help. I believe I can now figure this out. I am going to use Pins 1,2,3 to run power up to the gauge, and pins 4,5,6 for the tank sending wires and 1 wire to sending input of gauge. Yes, gauge is analog. Trouble was I did not try this configuration thus was not getting a...

"fuel gauge on the dash sender" is the terminal on the fuel gauge for the sender wire. I have 2 senders, from 2 tanks, these both come to the switch, this is where I am confused, how do I send the signal to the fuel guage from the sender? Also, thank you all for the questions and help. I...

Seasick, the switch is just an amazon buy, noy sure it has a make and model, but here is the link to it and a pic of the pins schematic https://www.amazon.com/dp/B08L6BZYLL/ref=cm_sw_r_apan_i_6BZBJ0D3A9V48EGB3SX6

Hookup1, yes,sending units and gauge functioning when I wire them directly. The original was wired similary except it was a toggle switch and now I am upgrading the whole panel to rocker switches.

Can someone please explain to me what I am doing wrong? I bought a on-off-on rocker switch, double pole double throw to replace the old Grady White Main/Aux Fuel switch. Am I connecting these wires correctly to the back of the switch? Thanks for any help. The finished product looks like this:

Wow...came out great. I'm still not done with mine as I had to put in gas tanks, bow hook, and all the thru hulls so got side tracked. Glad to hear also the boat is in the water.

Hi Robert, I would like to also pressure test my bracket for leaks, can't figure out how to plug the drain and also fill with air. Can you please explain your 1/2" PVC drain plug with air valve attached. Do you have any pics of it? I know this is an old posting but anymore explanation of this...

Hi Mike: Same problem here. It seems you know what to do with the edges. See my pics. I sanded/grinded down to good material. Be sure use a respirator, safety googles, and long sleeves. Fiberglass dust is nasty, itchy, and you don't want to breathe it in. Then I used Epoxy mixed with cabosil...

Recoil Rob: I know that they used the same gelcoat, I read that here a few times, and that is a great price. I will be calling to NJ dealers to see if I can find a price like this today. I am wondering however if your glass guy still had to tint further the gelcoat to match the 2004 paint job. I...

"GW gelcoat from a dealer, about the same price" I bought a quart of gelcoat for $50, I just searched for Grady White factory from Spectrum is $150. Besides the price difference, you will never match gelcoat right from the bottle when you have an older boat. The hues/tint will be off as the...

The way I am going to repair my non-skid is to dremel the spider cracks open, then fill with either using gelcoat or epoxy in some other non-gelcoat cracks. But to get the non-skid I am going to add some sand. The gelcoat coloring I will try match as well as I can to a 30 year old colored sun...

As I am staring now at the pulpit just thinking when I will be finally done with it. I will post some pics soon, I promise. I ended taking out the old wood, had some moisture still in it and did not want to do this for another 30 years. I bought 3 gallons of epoxy, ebond out of Florida, $120...

Hi AquaAddict, did you ever find the drains. I am replacing all 3 drains in the cooler/fish boxes of my 1988 24' Offshore. And the 2 deck drains in the cockpit helm area. Did you try the Component Hardware drains that Milliganwa suggested? Thanks for any help in this as I am working now on...

Hi Milliganwa, I am replacing all 3 drains in the cooler/fish boxes of my 1988 24' Offshore. And the 2 deck drains in the cockpit helm area. Did you try the Component Hardware drains? Specifically the Bronze ones? I would like to upgrade from the plastic and change the drains to bronze and never...