Search results

Yes it is in second hole from top . He said that is where it should be . He also said the deck angles will let him know if the bottom paint is dragging the bow down. Will let you know how it turns out.

Actually going out today again. Will try this and Grady Tech Rep has me doing deck angles at 2000 4000 and 5000. Said he can compare them to their in house numbers!.

The prop is a 14 1/2 x 15 Reliance SDS prop in perfect condition. The Engine is mounted in the number two hole from the top. I was running it with full fuel and just me in the boat. Very little gear. 10 gallons of water. It is an I4 Was using GPS speed Actually did do multiple passes and...

6100 max rpm stock prop from manufacturer trimming up until speed Painted, but just came out of maintenance. They pressure washed and cleaned bottom. Thanks

Anyone out there with a 2021 Freedom 215 with a f200 Yamaha? My bottom is painted. Just wondering what max speed and RPM you are seeing ? Trimmed up calm water i'm see 37 mph and 5500 rpm. Thought it was a little low! Any thoughts would be appreciated. Prop is stock

https://www.westmarine.com/switches?gclid=CjwKCAjwyIKJBhBPEiwAu7zll6uoa4PzYTHEMMXlvEgtOV37F3te0t8S2AjEDgZTbu0n8s0yFiagCBoCEFMQAvD_BwE

Hey Guys. I have a new 215 Freedom with a yamaha 200 on it . I just got an alert that a 50 hr optional service is due. I looked in both the Grady and Yamaha service manuals and don't see a 50hr service schedule . Anyone out there know what the 50 is ? Thanks

Hey all . Here is an update on those plastic coated styrofoam coated seals in the cap that fell into my tank. Haven’t had any issues yet. But the one in the bottle of gas on my work bench did sink after about two weeks sitting in the gas. Also spoke to Grady tech rep , he didn‘t think it would...

Mine was like a styrofoam coated seal. like most you see in caps. I have another I took out and have it sitting a bottle of gas to see if it sinks. So far it's still floating . A good thing!!

Going to leave the one in my garage in the cup filled with gas stir it up every now and then , See if it sinks.

Hello Dennis, Thanks for the reply. I just came in from the garage. Yes the cap seal floats in gas. Going to leave it in for a couple of days to see if it deteriorates and sinks. Thanks again! Joe

It was the stupid cap seal. I figure if i have any issues fueling i can snake a piece of wire down and puncture it. An 18 gauge copper building wire should do it . Thanks for the response , Much appreciated

Does anyone know if there is a screen in the filler neck of a new 2021 or around 2021 vintage? I dropped a top from a cap in there and wondering if it is a disaster or not. Any info would be greatly appreciated . Thanks

That had crossed my mind. Thanks for the link!

I have a new 215 also with the 10 inch . I would put the 12 . In split screen mode you will be glad you did. If you ordered the boat put a Windlass in!!!! I love the boat . The only thing I forgot is the windlass and I miss it. If your going to fish get the windlass!!!!!!!!!!!!!!!!!!

Has anyone added a windlass system to a Grady. I have a new 215 Freedom and fish a lot in the ICW . Moving and pulling up the anchor is getting to be an issue when I am alone.

Thanks for all the replies. I finally found Gradys take on the issue. https://www.gradywhite.com/explore/grady-owners/customer-tips/why-not-run-engine-with-battery-switch-on-both/

So it is correct to assume that the engine will only charge the selected battery. And both when selected to both? But both is not SAP.