180 Glove Box Door Panels

[Jhart]

Does anyone know where to find replacement glove box doors (2) for the 180 Fisherman center console?

 

[JJF]

If you have the originals, I suggest having them made.

 

[Jhart]

Unfortunately, my brother threw them away along with the weatherstripping, so I don't have the original dimensions to go off of. Tried to find them online, but it seems to be nearly impossible to locate replacements or measurement information anywhere

 

[Father's Day]

I might be mistaken, I believe you can replace the whole box. Buy a new one on Amazon or Boats.net

 

[JJF]

you can make templates and then use send-cut-send to get new ones made

Materials | SendCutSend

Shop a variety of laser cutting and waterjet cutting materials, upload your file & we'll cut and ship your parts within 3 days.

sendcutsend.com

 

[Recoil Rob]

I have a 2004 180 Sportsman, the glove box is molded into the console with gray Lexan doors .

If this is what you're looking for I'd be happy to go out and measure them for you when it gets a bit warmer, the boat's on the trailer in the driveway but it's covered with snow. Send me a PM if you want the dimensions.
Rob

 

[Surely Bassey]

very cool Bob

 

[Recoil Rob]

Rob....

 

[Recoil Rob]

In case the OP ever comes back, I measured them before I put the tarp over the boat today.

top door 16-3/16 wide, 5-11/16 high

bottom 16-3-16 wide, 4-7/16 high.

 

[Fishtales]

I'd template them with brown paper and cardboard. Once you get the first template done, transfer to a sturdy material and either have fabricated or do it yourself with starboard.