Hi all. I just got a good deal on an 87 overniter that has a blown powerhead. I have the replacement engine on my 77 grady center console.(boat is now junk) While the motor is off, I would like to check into the transom. It still seems to be in good shape, but does have 2 small cracks outside of eng mount (outboard).I just want piece of mind so I don`t have to pull motor again anytime soon and/or possibly repair with cpes or gitrot if it`s starting to get soft. Can I get to the wood for inspection by removing the metal strip or will I have to cut a strip of the glass.
Also its bottom paint needs to be redone (never dealt with bottom paint before) I don`t really need it as it will always be on a trailer, but I`ve been reading its easier to repaint than get back to original gelcoat shine. Can this be done on trailer or do I need to put it on jacks.
Also its bottom paint needs to be redone (never dealt with bottom paint before) I don`t really need it as it will always be on a trailer, but I`ve been reading its easier to repaint than get back to original gelcoat shine. Can this be done on trailer or do I need to put it on jacks.