lost my cushion does any one know where I can get one , who makes them, used one ??
Attachments
-
DSC_1009.jpg -
DSC_1010.jpg
2006 228 rear starboard cushion
- Thread starter wavetamer
- Start date
Parthery
GreatGrady Captain
If you are not married to the logo, you can take the one you have remaining to a reputable canvas place and have it made. You could likely have one made and the other redone for the price of OEM to match. As long as you do not mind not having the logo.
Doc Stressor
Well-Known Member
- Joined
- Nov 13, 2009
- Messages
- 1,178
- Reaction score
- 289
- Points
- 83
- Location
- Homosassa, FL
- Model
- Seafarer
You may be in luck. I have a brand new one for a 226 that has not even been unwrapped. I'm pretty sure that it is the same one used on the 228 and that the port and starboard seats are identical.
Call Grady White to confirm this and get a price on a new one. Then send me a private message and we'll see what we can work out.
I bought a pair of them a while back after I had a bad mildew problem from the boat being stored under a cover over the summer. I was able to restore one of mine well enough that I only needed to replace the one on the port side.
Call Grady White to confirm this and get a price on a new one. Then send me a private message and we'll see what we can work out.
I bought a pair of them a while back after I had a bad mildew problem from the boat being stored under a cover over the summer. I was able to restore one of mine well enough that I only needed to replace the one on the port side.
Doc Stressor
Well-Known Member
- Joined
- Nov 13, 2009
- Messages
- 1,178
- Reaction score
- 289
- Points
- 83
- Location
- Homosassa, FL
- Model
- Seafarer