I picked up a set of Bennett M120's. My question is where should these be placed? Where does Grady place them? Pics would be very helpful. My boat is a 2003 model.
208 Adventure trim tab placement
- Thread starter grossjas
- Start date
I just installed the Bennett M120's on my boat.
I would read all the directions at home before you go out to the shop/garage/marina to do the install. Message me if you get stuck.
here is some info from last month:
http://www.greatgrady.com/forum/viewtopic.php?f=3&t=21136
I would read all the directions at home before you go out to the shop/garage/marina to do the install. Message me if you get stuck.
here is some info from last month:
http://www.greatgrady.com/forum/viewtopic.php?f=3&t=21136
enfish
Well-Known Member
- Joined
- Oct 17, 2006
- Messages
- 451
- Reaction score
- 77
- Points
- 28
- Location
- San Marcos, CA
- Model
- Adventure
Mount as far outboard as possible. But before you start drilling holes, make sure you have clearance on the inside of the transom for the hydraulic fittings.
