I have a 1999 228 Seafarer with the washdown and livewell connected to one pump controlled under the livewell switch. I only use one sea cock to draw water into the boat with the washdown seacock shut down/closed off. Water is drawn into the boat thur the livewell seacock. There is also a control knob that I turn to have the pump activated after I turn the livewell switch on. The pump works fine for about 15-20 seconds then shuts off and then I have to turn the knob off and then on again to reactivate the washdown pump.
Any ideas as to why I have to keep turning off/on the knob to get washdown to work again?
Any ideas as to why I have to keep turning off/on the knob to get washdown to work again?