265 dome light

mronzo

Well-Known Member
Joined
Jan 31, 2005
Messages
261
Reaction score
0
Points
0
The helm dome light has a switch for the white and red lights and another
switch for the spreader lights. the spreader light switch is broken and needs replacing.
I tried to unscrew the dome unit from inside the upper compartment, they turned but didn't loosen the unit.
how do you take them apart?
Thanks in advance.
 

1st grady

GreatGrady Captain
Joined
Jan 31, 2005
Messages
537
Reaction score
3
Points
18
Remove the cover by removing two small screws. Remove the bulb. Mine had a screw under the bulb holding the fixture to the e box. The switces can be removed by loosening a small ring nut on the inside of the lamp housing securing the switches.
 

MixinItUp

Active Member
Joined
Jun 28, 2009
Messages
27
Reaction score
0
Points
0
mronzo,

I assume that your dome light is the same as the dome on my 2006 228.

Have you removed the clear plastic cover/lens? I used a utility knife to help unseat the plastic tabs holding the lens in place. Removing this bulb lens exposes the bulbs and the screws which screw upward into the ebox(not downward from the ebox). Once these two screws are removed pop the dome assembly off and get to the push buttons which is likely your problem.

MixinItUp
Savannah GA