300 Marlin Wiper Motor

[Angler Management]

I need a replacement for my starboard wiper motor. I'm away from the boat for next two weeks and my dealer says the one I ordered in the past is discontinued, with no exact match suggested. I thought I'd try to source myself. Anyone have the part number or have replaced theirs recently with one they know works? Standing by for part number from dealer, but not holding my breath. Thanks!

 

[ElyseM]

from GW for a question i asked. don't know if it will help you. good luck, ron


"These are the GW part numbers that are assigned to the 2021 300 Marlin.
Our GW part #23-952 by Wexco (item #4R2.12.R60CE) port wiper motor. See our info below for the 60 degree wiper motor.

The part # for the starboard side GW #23-920 (item #4R2.12.L60CE)."

 

[Angler Management]

Oops, sorry. I'm 2007 GW Marlin. ElyseM, do you think the part is similar enough and the design hasn't changed and this part will work?

Dealer just said the old part number was Marinco 38065,

 

[ElyseM]

yes i saw the year. there's' really not a lot of variation out there. best to pull the part and see what will replace it. new one is pantograph, i don't know what you have. these motors are really small so you may wind up with a good selection. good luck, ron

 

[Angler Management]

Thank you!!! I replaced the arms too, looking forward to an awesome view up here in the PNW.

 

[Angler Management]

FYI had input from another local owner who had success with this:

Schmitt & Ongaro Heavy Duty 2-Speed Wiper Motor - 2.5" Shaft - 12v

SKU: ONG30991

 

[Fishtales]

I think the motor is sold under various names. Here's another recommended by another owner.

4R WWF Marine Wiper Motor

The industry standard for many years, the Bosch-style WWF motor is now available in this CE-certified 4R version.

www.go2marine.com

 

[Angler Management]

Thanks Mr FishTales