Adding a Rocket launcher

[Dand1]

Called Grady and there is a re enforcement plate imbedded into the underside of the fuel tank cover on 305/330 express boats. Design is for mounting fighting chair or launchers, I’m going to install a Realese rocket launcher. Just wondering if anyone has removed this large cover and once it’s off I plan to replace any fuel lines and wiring I can as PM Is the cover hard to reseal and is it a huge job.
Thanks for any input

 

[Fishtales]

As I recall, there is additional material under the glass for this on most GWs 30+ feet (maybe even smaller). I don't think you will need to relocate much if anything. Investigate a flat as possible mount (flush mount) that allows you to take off the rocket launcher if desired - they make them. The only issue is the cockpit will be tighter. Having the ability to quickly mount/dismount will be a big win for other uses.

This one (Todd) is overkill but you get the idea. I recall a mount that twisted and locked in place and could be removed when not desired.

Flush Mount Posi-Lock Base

Todd: 6900 Description: Round Flush Mount Base Size: 9-3/8

nationalsupplydirect.com

D or F looks like an option.

Boat and Marine Pedestals, Swivels, Mounts & Hardware | Arrigoni Design

Looking for new hardware for your boat table or seats? We are experts in marine pedestals, mounts, and slide / swivel systems to ensure you get the most out of your boating experience. Click to learn more.

www.arrigonidesign.com