anti fouling paint f-250's

tony-sally

Well-Known Member
Joined
Feb 12, 2006
Messages
164
Reaction score
2
Points
18
I'am updradeing to f-250's from 225 my question is on my 225's
i would paint the bullets with interlux trilux which worked very well
the boat stays in all season and after the water warms up i would have
a lot of groth on it every week. Aquagard alumi-koat is clear antifouling
any one ever used this and how did it work? would like to keep
the new f-250's nice and clean
thanks in advance tony 33 grady Sally Ann
 

MRT

Well-Known Member
Joined
Sep 1, 2006
Messages
94
Reaction score
0
Points
0
Location
Egg Harbor Township, NJ
Hey Tony - Not sure if you remember me, but Russ from EMC brought me down to your boat to check out your radio install back in the fall.

Anyhow, I was talking with Cambells over in somers point when I was getting ready to paint my motors this year. Appearently Interlux came out with a clear version of Trilux recently. They said they haven't gotten much feedback on it yet, but were expecting it to work well. I ended up going with black as I had already taken some of the paint off the motors.

Matt
 

tony-sally

Well-Known Member
Joined
Feb 12, 2006
Messages
164
Reaction score
2
Points
18
MRT said:
PS - Congrats on the new motors. Where did you get them?

Campbells matt their not on yet but I should be in the water in a couple of weeks stop and see me russ is going to be putting some
underwater lights on tony
 

MRT

Well-Known Member
Joined
Sep 1, 2006
Messages
94
Reaction score
0
Points
0
Location
Egg Harbor Township, NJ
I'll have to check it out. Is your boat at cambells now? I was not able to get a slip in Seaview Harbor, but did manage to get one in Harbour Cove, right near cambells. I'll keep an eye out for it.