Need to replace leaning post upholstry, backerst on back seat, and coming pads on a 257. Anyone have an idea what jam looking at for this?
Anyone know cost to replace upholstry
- Thread starter Scott1115
- Start date
I got an estimate end of last season to replace all coming pads, helm seat, transom fold out seat, as well as the two cushions (backrest and seat) for the seat in the front of the center console and also the cushion seat that covers the two front storage bins at the front of the center console and it was approx. $2,000.
Keep in mind that like anything the price can fluctuate depending on the quality of the material used and if it is hand stitched versus not (e.g., I want the coming pads to have the lines in them as they do when they come standard from Grady, etc.) I've used this vendor before and am very happy with all of their work, so when I do get it done, it will be with them.
Hope this helps.
Keep in mind that like anything the price can fluctuate depending on the quality of the material used and if it is hand stitched versus not (e.g., I want the coming pads to have the lines in them as they do when they come standard from Grady, etc.) I've used this vendor before and am very happy with all of their work, so when I do get it done, it will be with them.
Hope this helps.
Fishtales
Well-Known Member
- Joined
- Jan 31, 2005
- Messages
- 8,232
- Reaction score
- 1,344
- Points
- 113
About 10 years ago (previous Grady), I had pink blotches appearing on my combing bolsters. Grady provided new replacements and all I had to do was the install which was easy to do. As I recall the bolsters came from Wise Co. Maybe google them and see if they can help you out.
Fowl Hooked
Well-Known Member
- Joined
- Jun 4, 2007
- Messages
- 220
- Reaction score
- 60
- Points
- 28
- Location
- Southern Maryland
- Model
- Express 265
Not sure where you're located but I found a guy here in Southern MD who fixed some snaps and re-foamed a couple cushions and completely redid the cockpit bolsters on my 265 for $500. The embossed GW crest that was in the middle of the stern piece couldn't be replicated (though he was willing to piece it in if I wanted) but otherwise it looks just like the factory pieces.
Brett
Brett