Battery ground on a 208

SandyBottom

Member
Joined
Jun 7, 2011
Messages
5
Reaction score
0
Points
1
Hi, the mechanic that winterized my boat disconnected the ground wires from the battery. There are 3 wires. The main ground, a green and black pair and a jumper wire that I think goes from one negative terminal to the other. Can anyone confirm how I should reconnect these wires?
Thanks
Jay
 

Attachments

  • IMG_6594.jpg
    IMG_6594.jpg
    174 KB · Views: 183
  • IMG_6593.jpg
    IMG_6593.jpg
    180.9 KB · Views: 183
  • IMG_6591.jpg
    IMG_6591.jpg
    106.2 KB · Views: 182
Thanks Skunk Boat. That's what I was thinking but I was not sure if the 2 needed to go the the #1 battery or not.
Thanks again.
 
From the pics it looks like you need to wire brush the lugs. They look oxidized.
The smaller negative cable usually connects to battery 1 assuming that is the battery that the bilge feed is connected to. Although it doesn't actually matter electrically , it does eliminate a possible issue should the common large neg cable between 1 and 2 become defective.