- Joined
- Oct 11, 2010
- Messages
- 6
- Reaction score
- 0
- Points
- 1
Has anyone else had their battery selector switch apart? I needed to replace mine because the knob is wearing out and noticed that their are two wires going to the BAT2 post on the switch. It's been that way since new but I found it strange that there would be two wires there. BAT1 has just the positive lead to the other battery and the FEED post has two wires (one to motor and one to accessories) as I expected. This is on a 2001 22' Fisherman with the stock Guest switch for two batteries. I'm mainly just curious if anyone else had noticed the same and what that wire goes to.