Bimini cover 94 tournament 192 screw??

jaykolkmann

New Member
Joined
Jul 21, 2021
Messages
2
Reaction score
0
Points
1
Age
40
Model
Tournament 192
I just purchased a 94 tournament 192. It came with the Bimini cover, but there’s no screw to attach it to the sliding frame that’s attached to the boat. If that makes sense. I’m looking for the screw size to attach the Bimini to the boat. Is it just a standard thumb screw for all Biminis that will fit ?? Any help would be greatly appreciated this is my first post in new here!
 
Last edited:

glacierbaze

Well-Known Member
Joined
Jul 6, 2012
Messages
1,220
Reaction score
199
Points
63
Age
72
Location
Chapel Hill and Pine Knoll Shores, NC
If the slide track is mounted flat on top of the gunnel, you need these in the track, and the eye on the bottom of your bimini frame goes in this piece.


If the track is mounted on the vertical surface, you need this.


If you really just need the pin/screw, 1/4 X 24 X 1" would be a good start.
 

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
4,689
Reaction score
555
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
Yup - standard issue stuff.

I wouldn't use a "standard thumb screw", though. The kind you find at hardware stores will typically be regular steel.
 

jaykolkmann

New Member
Joined
Jul 21, 2021
Messages
2
Reaction score
0
Points
1
Age
40
Model
Tournament 192
Thanks everybody it’s mounted to the side and everything is still intact so I literally just need the thumb screw.. I just wasn’t sure if it was a specific size or not. thanks again!
 

wspitler

GreatGrady Captain
Joined
May 16, 2011
Messages
912
Reaction score
159
Points
43
Location
Inglis, FL
Model
Express 330

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
6,620
Reaction score
711
Points
113
Location
NYC
If you buy a bimini mounting knob in a marine store it is most likely stainless steel. Do not use anything else.