Burgee Flag Staff

B

Bill T.

Active Member
Joined
Nov 3, 2007
Messages
38
Reaction score
0
Points
0
Location
Weymouth, MA
Hello All,
I just purchased a 1987 204C. My question is, does anyone have access to their bow rail to get a measurement of the hole where the staff goes into. This boat did come with one. (missing) My boat is in the driveway shrink wrapped and I can't get at the bow rail without ruining the cover. I'm in MA and the up coming boat show may just produce one if I have a measurement.

Thanks in advance,

:(
 
I have an 88 204c I can measure tomorrow, what is the staff part?
 
jrgrady said:
I have an 88 204c I can measure tomorrow, what is the staff part?
Click to expand...

The staff is actually the flag pole, flag staff, whatever. It is made of S.S. about 14" tall with a plastic ball on top. It holds the triangular flag. The dia. is what I don't know.

Thanks for the reply,
 
I looked on my boat and no flagstaff. sorry couldnt help you
 
Where is it located?

I have an 88 205 overnighter. I have a broken flag staff in the fwd-most part of the bow rail. Is that what you are asking about? If so, I can measure mine this weekend.
 
Re: Where is it located?

bondstreet said:
I have an 88 205 overnighter. I have a broken flag staff in the fwd-most part of the bow rail. Is that what you are asking about? If so, I can measure mine this weekend.
Click to expand...

Ah-YUP,

That be the part Chingadera. That measurement would be a great help .............. Thanks in advance, :D
 
Re: The measurement

bondstreet said:
I crawled under the tarp this afternoon. It measured .5 inches.
Click to expand...

Thanks,

I'm not sure if I answered you about the measurement you got for me.
That is just what I bought as a replacement. 1/2 inch.

THANKS AGAIN,
 
You must log in or register to reply here.