- Joined
- Jun 16, 2015
- Messages
- 339
- Reaction score
- 204
- Points
- 43
- Location
- Brisbane, Australia
- Model
- Seafarer
Reply from Bill Bergman at Hullstripes.com
“Sean,
You can cut the stripe in the gaps and put each stripe on separately. Just butt the application tape up as you go and that will keep the gaps.”
Will give it a go.
Grady no longer supply that Hull Stripe. Check out freight. I can wait until May and add the rod holders to their next shipment of boats to save on freight.
“Please see below response from Grady-White:
10-108 ROD HOLDER PLASTIC W/HOLES 180/228 @ $17.00ea
The original decals are not available. Customer can upgrade to more current decals. This is the styleline tape we use on the 2021MY 228.
25-236 TAPE STYLELINE MAG 2019 (100FT ROLL) @ $1.10ft
Sean, as you can see the parts are not expensive, but you will need to factor in freight costs which will be approx. $200-$300 on top of the parts.”
“Sean,
You can cut the stripe in the gaps and put each stripe on separately. Just butt the application tape up as you go and that will keep the gaps.”
Will give it a go.
Grady no longer supply that Hull Stripe. Check out freight. I can wait until May and add the rod holders to their next shipment of boats to save on freight.
“Please see below response from Grady-White:
10-108 ROD HOLDER PLASTIC W/HOLES 180/228 @ $17.00ea
The original decals are not available. Customer can upgrade to more current decals. This is the styleline tape we use on the 2021MY 228.
25-236 TAPE STYLELINE MAG 2019 (100FT ROLL) @ $1.10ft
Sean, as you can see the parts are not expensive, but you will need to factor in freight costs which will be approx. $200-$300 on top of the parts.”