Excellent Penetrating Oil For Salt Water Corrosion

hotajax

GreatGrady Captain
Joined
Nov 5, 2007
Messages
595
Reaction score
7
Points
18
Location
Crisfield, MD
A product from Kimball Midwest, Torq "CB" Corrosion Blasting Penetrating Oil.
Used this stuff to disassemble some salt water spinning reels I haven't had apart in a couple of years. Cracker jack stuff. Unlike most other sprays, it cuts through corrosion.
I have no financial interest in this stuff, just letting you know it's well worth the $17. In my book as good as Kroil, if not better.

 
Last edited:

ttles714

Well-Known Member
Joined
Jun 6, 2009
Messages
202
Reaction score
16
Points
18
Location
NJ
Seams like you have to register an account and order in volume to buy
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,145
Reaction score
1,312
Points
113
Location
NYC
Where did I read that the best penetrating solution is a 50/50 mix of ATF transmission fluid and acetone?
I haven't tried it but will at some point. On the downside, the article said that it doesn't store well so mix it when you need it.
 

ttles714

Well-Known Member
Joined
Jun 6, 2009
Messages
202
Reaction score
16
Points
18
Location
NJ
Actually the 50/50 Trans/Acrtone works very well..... shake before using .... And does even better with heat than commercial oils