My 307 has a center bilge with no bilge pump. The problem I have is when it is at the dock any water that gets into the rear bilge drains to the center bilge where there are 2 valves for the toilet. These valves are often under water and the only way to remove the water is with a wet dry vacuum. Has anyone else experienced this and if so is there a solution.
Freedom 307 Bilge
- Thread starter David Sha
- Start date
I don't know your boat... and someone will likely respond back to help better...
But do you also have a forward bilge where there IS pump... and is the center bilge supposed to drain there but the drain hole between the two is currently plugged?
Otherwise, installing a bilge pump might be in order.
Unless, in your boat, the enter bilge is supposed to drain into the aft bilge but you have so much weigh forward that it's disrupting that? But, again, I don't know your boat
Just thinking out loud
But do you also have a forward bilge where there IS pump... and is the center bilge supposed to drain there but the drain hole between the two is currently plugged?
Otherwise, installing a bilge pump might be in order.
Unless, in your boat, the enter bilge is supposed to drain into the aft bilge but you have so much weigh forward that it's disrupting that? But, again, I don't know your boat
Just thinking out loudLooking to purchase a Grady 2009 Chesapeake with (2) Yamaha 250's. What model Loadrite trailer that is correct trailer for this model ?, appreciate any help...thanks!
Looks like you accidentally clicked on someone else's post. When you're in a sub-forum, look for the "post thread" button and start there