Fresh water pump ?

Legend

GreatGrady Captain
Joined
Jun 29, 2006
Messages
1,423
Reaction score
194
Points
63
Location
Southern New England
Model
Sailfish
I need to replace my fresh water pump on my 04 Sailfish. The existing original pump is a Shurflo Blaster. When I researched purchasing a new one, the product description says it is a washdown pump. Anyone know if GW was using washdown pumps as the fresh water pump? Not sure what the difference between a wash down and a fresh water pump. Thanks
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,149
Reaction score
1,312
Points
113
Location
NYC
There is a difference between a washdown and say a livewell pump. They are designed for different duty cycles, with the washdown a short duty cycle and a livewell a continuous operation.
For washdown versus fresh water, the main factor is the flow rate or gallons per hour. Both applications have short duty cycles in general. You should select a pump with a rating close to the one you are replacing assuming it worked OK.
 
  • Like
Reactions: Legend

ilmmct

Well-Known Member
Joined
Jul 2, 2019
Messages
74
Reaction score
12
Points
8
Age
63
Location
Wilmington, NC
Model
Explorer
My 2014 GW CE 251 has this Fresh Water Pump:

SHURFLO AQUA KING™II PREMIUM 4.0
MARINE FRESH WATER PUMP –

PRODUCT TECHNICAL DATA SHEET:
 

Attachments

  • C9FD3F02-CC8D-4063-8952-E3E5A2041651.jpeg
    C9FD3F02-CC8D-4063-8952-E3E5A2041651.jpeg
    492.8 KB · Views: 5
  • Like
Reactions: Legend

DennisG01

GreatGrady Captain
Joined
Sep 1, 2013
Messages
6,839
Reaction score
1,214
Points
113
Location
Allentown, PA & Friendship, ME
Model
Offshore
Fresh water pumps usually have 1/2" fittings whereas washdown pumps are typically 3/4". Or, at least, the ones I've seen are like that. I'm not 100% positive that this is the only difference, although I've wondered the same thing and have never been able to come up with another answer since you can often get either in comparable GPM and PSI.
 
  • Like
Reactions: Legend