1 1st grady GreatGrady Captain Joined Jan 31, 2005 Messages 537 Reaction score 3 Points 18 Jan 29, 2008 #1 I was thinking I should replace the rubber O ring on the fuel fill caps. They appear cracked. Does anybody have a lead on where I can obtain replacements an/or what size? What manufacturer was used? 1995 Islander.
I was thinking I should replace the rubber O ring on the fuel fill caps. They appear cracked. Does anybody have a lead on where I can obtain replacements an/or what size? What manufacturer was used? 1995 Islander.
T t bird Well-Known Member Joined Apr 20, 2005 Messages 85 Reaction score 0 Points 0 Location Edgewater Maryland USA Jan 30, 2008 #2 i replace mine almost every year...just went to hardware... picked up a couple of same size "o" rings.... T
i replace mine almost every year...just went to hardware... picked up a couple of same size "o" rings.... T
B BobP GreatGrady Captain Joined Apr 27, 2005 Messages 4,744 Reaction score 6 Points 38 Location Long Island, NY Model Sailfish Jan 30, 2008 #3 Oil tank port and FW tank too!
1 1st grady GreatGrady Captain Joined Jan 31, 2005 Messages 537 Reaction score 3 Points 18 Jan 30, 2008 #4 thank you, thank you, thank you!!
B BobP GreatGrady Captain Joined Apr 27, 2005 Messages 4,744 Reaction score 6 Points 38 Location Long Island, NY Model Sailfish Jan 31, 2008 #5 Clean the o ring grove out on both sides before you replace them. Any dirt left in there and the o ring will not seal. Same goes for deck plate o rings, don't ya know!
Clean the o ring grove out on both sides before you replace them. Any dirt left in there and the o ring will not seal. Same goes for deck plate o rings, don't ya know!
