- Joined
- Jul 9, 2009
- Messages
- 11
- Reaction score
- 0
- Points
- 0
Well I finally got my tank!! its very shiny. it's two inches shorter and about an 1/8 inch larger in width then the origingal, a bit tight but I it can be worked in. The original hard rubber strips the tank sat on are broken and cracked.
What material is good to run along the stringers where the tank sits?
I was considering using a rubberized undercoat on the bottom side of the tank and any spots where the wedges will make contact with the tank.
any thoughts?
Thanks!
What material is good to run along the stringers where the tank sits?
I was considering using a rubberized undercoat on the bottom side of the tank and any spots where the wedges will make contact with the tank.
any thoughts?
Thanks!