Hello All, I wanted to post some pictures of my weekend projects. First I installed my new reupholstered marine vinyl rear seat cushion and sealed the top so that water will not get behind and get the foam wet.
Then I moved the spot light from on top of my hard top to the bottom, and then installed the new 15" radar dome with a 4 degree wedge. I then ran the electronics and the cables down my new rigging tube which made this task much easier. Then I removed the plexi glass and made a cardboard template with the holes cut out and matched it up to the location. Then I installed the new starboard with the old hinge and routed the edge and installed the electronics. And I think it turned out pretty good and a lot cheaper then if I had someone else install it. Let me know how you think it looks. Thanks.
Then I moved the spot light from on top of my hard top to the bottom, and then installed the new 15" radar dome with a 4 degree wedge. I then ran the electronics and the cables down my new rigging tube which made this task much easier. Then I removed the plexi glass and made a cardboard template with the holes cut out and matched it up to the location. Then I installed the new starboard with the old hinge and routed the edge and installed the electronics. And I think it turned out pretty good and a lot cheaper then if I had someone else install it. Let me know how you think it looks. Thanks.