Hatch arms
- Thread starter rdbmd
- Start date
it may have a manufacturer's (not Grady) part number on it. Try looking. If you are referring to a gas shock strut device, the important specs to match a new one are the force in pounds (usually part of the part number), the open length and the fully retracted length. Be careful if you are looking at less expensive Chinese replacements. I have had issues with them in the past and now avoid them.
Here is an example of what I am referring to:
www.boatoutfitters.com
Here is an example of what I am referring to:
Black Painted Gas Shock 10"
Upgrade your boat with a 10 stainless steel gas shock from Boat Outfitters. Get the highest quality and best performance for your boat today!
www.boatoutfitters.com
Last edited:
Fishtales
Well-Known Member
- Joined
- Jan 31, 2005
- Messages
- 8,232
- Reaction score
- 1,344
- Points
- 113
228 Livewell Support Arm
Tried finding a prior post but with no luck for a 228... I am looking to replace the arm of my livewell (2000 228). I saw someone recommended 625-3-30-A1A1 for the overnighter. Is it the same arm as the 228?
www.greatgrady.com
This thread should help. Ameritool makes them.
Thanksit may have a manufacturer's (not Grady) part number on it. Try looking. If you are referring to a gas shock strut device, the important specs to match a new one are the force in pounds (usually part of the part number), the open length and the fully retracted length. Be careful if you are looking at less expensive Chinese replacements. I have had issues with them in the past and now avoid them.
Here is an example of what I am referring to:
Black Painted Gas Shock 10"
Upgrade your boat with a 10 stainless steel gas shock from Boat Outfitters. Get the highest quality and best performance for your boat today!