I have a chipped live well hatch cover.
I've read a lot about patching/re-building hatch covers chips here in the forums...my head is spinning. Poly-fair, 3M epoxy with filler, fiberglass filler and resin, and many other recommendations. I have a history of screwing up Marine Tex and other glass repair jobs. The divots are relatively small but a few are on the edges. I also dont want to paint or gel coat afterwards....hoepfully theres a decent "white" match thats close enough.
A friend at the boatyard I work for has viewd the hatch and recommends poly-fair
Any material/product recommendations and method for filling those divots and edges? Not looking for perfection, but something better than the current conditon that will last a couple years.
thanks (I will try to post some pics of the hatch later)
I've read a lot about patching/re-building hatch covers chips here in the forums...my head is spinning. Poly-fair, 3M epoxy with filler, fiberglass filler and resin, and many other recommendations. I have a history of screwing up Marine Tex and other glass repair jobs. The divots are relatively small but a few are on the edges. I also dont want to paint or gel coat afterwards....hoepfully theres a decent "white" match thats close enough.
A friend at the boatyard I work for has viewd the hatch and recommends poly-fair
Any material/product recommendations and method for filling those divots and edges? Not looking for perfection, but something better than the current conditon that will last a couple years.
thanks (I will try to post some pics of the hatch later)