helm chair
- Thread starter dogdoc
- Start date
Years ago, I had a friend who painted his seats with Rustoleum spray. I was surprised how it came out. Not bad at all.
There are paints specifically for plastics and assuming the armrest are plastic ( as opposed to vinyl covered) painting may be a decent option.
There are paints specifically for plastics and assuming the armrest are plastic ( as opposed to vinyl covered) painting may be a decent option.
JJF
GreatGrady Captain
- Joined
- Feb 14, 2021
- Messages
- 658
- Reaction score
- 200
- Points
- 43
- Location
- Gloucester, MA
- Model
- Canyon 306
I have painted plastic with KRYLON-FUSION and have had good results.
I would recommend pressure washing, let dry, then wipe down with a plastic friendly solvent (wear gloves, so you don't get skin oils on the parts). Leave the parts in the sun to get as warm as possible, but not hot (I doubt white would get that hot anyway). Orient the parts vertivcally and spray. Be very patient and spray slowly. Follow the instructions on the can for building up several coats.
www.krylon.com
I would recommend pressure washing, let dry, then wipe down with a plastic friendly solvent (wear gloves, so you don't get skin oils on the parts). Leave the parts in the sun to get as warm as possible, but not hot (I doubt white would get that hot anyway). Orient the parts vertivcally and spray. Be very patient and spray slowly. Follow the instructions on the can for building up several coats.
Fusion All-In-One® | Krylon® Spray Paint
Discover Krylon Fusion All-In-One, the ultimate spray paint for any project. Perfect for metal, plastic, and more. Get vibrant, long-lasting colors today!
www.krylon.com
Before you spray - maybe try cleaning better? I've sprayed plastic parts with good results, but if you can clean it, that's a better solution.
Is the seat base fiberglass?
Is the seat base fiberglass?
Don Davis
Well-Known Member
- Joined
- Mar 2, 2020
- Messages
- 394
- Reaction score
- 126
- Points
- 43
- Age
- 61
- Location
- Courtenay, British Columbia
- Model
- Seafarer
I had those same helm seats and used Mr Clean magic erasers on them and they cleaned right up to almost new, give that a try first you may be surprised.
- Joined
- Apr 23, 2019
- Messages
- 422
- Reaction score
- 81
- Points
- 28
- Age
- 71
- Model
- Marlin
just to clarify, new cushions, not painting the metal it is fine, only the white armrest, back and seat which has very worn finish, not mildew/dirt. I will try a good prep and krylon and give update
The seat base looks like fiberglass?
I believe the seatback is HDPE, right? That's going to be really tough to get paint to stick to for any amount of time... and then it's going to look worse than it does now. I'm not sure what material the armrests are. But I'd really caution against painting until you first try a really good cleaning - maybe an aggressive cleaning. HDPE is different than normal plastic. Once they're cleaned up, any "wear" will mostly disappear.
I believe the seatback is HDPE, right? That's going to be really tough to get paint to stick to for any amount of time... and then it's going to look worse than it does now. I'm not sure what material the armrests are. But I'd really caution against painting until you first try a really good cleaning - maybe an aggressive cleaning. HDPE is different than normal plastic. Once they're cleaned up, any "wear" will mostly disappear.