How do I remove this cushion please.

JustEnough

Active Member
Joined
Dec 25, 2022
Messages
36
Reaction score
5
Points
8
Location
South Florida
Model
CHOOSE
Good evening all. I plead ignorance and can’t figure out how to remove this bolster. The cushion is on the Port side, stern access door of a 375 Freedom. I assume the holes on the bottom are for drainage. Do I just “muscle it up” since I can’t find any screws?
Thanks for the help.


IMG_5216.jpeg
 

glacierbaze

Well-Known Member
Joined
Jul 6, 2012
Messages
2,480
Reaction score
644
Points
113
Age
75
Location
Chapel Hill and Pine Knoll Shores, NC
Model
Seafarer
push up on the inboard edge of those drain grommets and flatten them toward the door panel, and you will probably find some Phillips head screws if you poke around with a screwdriver. You may be able to slide a credit card, or a plastic putty knife behind the bolster to locate the screw position. Remove the screws, and lift straight up.
 
  • Like
Reactions: Chutch

JustEnough

Active Member
Joined
Dec 25, 2022
Messages
36
Reaction score
5
Points
8
Location
South Florida
Model
CHOOSE
push up on the inboard edge of those drain grommets and flatten them toward the door panel, and you will probably find some Phillips head screws if you poke around with a screwdriver. You may be able to slide a credit card, or a plastic putty knife behind the bolster to locate the screw position. Remove the screws, and lift straight up.
Thank you - just didn’t want to dig around without checking first. Greatly appreciated.