Hydraulic Steering

VCinRI

Active Member
Joined
Jul 4, 2007
Messages
41
Reaction score
0
Points
0
Location
Johnston, RI
Hello,
I would like to know what type of of steering systems some of you have for twin outboards say from 250 hp and up?
Single piston, dual piston? Size helm?

What setup would you recommend for non-power assisted twins?

Thanks,
VC
 

ocnslr

GreatGrady Captain
Joined
Jan 31, 2005
Messages
1,907
Reaction score
43
Points
48
Location
Fort Myers Beach, FL
Model
Islander
We have a single steering cylinder and smaller (F150) twins.

Most of the written guidance I have seen indicates single cylinder for up to 300HP total. After that, it should be twin cylinders.

You would need twin cylinders for the situation you are considering.
 

Fishtales

Well-Known Member
Joined
Jan 31, 2005
Messages
7,721
Reaction score
1,200
Points
113
Hi,
I have twin F250s and they come with dual piston steering. I also have the power assist (additional pump) and it works great. I did have a recall on the pump that was covered under warranty a few years ago. The dealer swapped it out.
 

Legend

GreatGrady Captain
Joined
Jun 29, 2006
Messages
1,425
Reaction score
194
Points
63
Location
Southern New England
Model
Sailfish
I have twin F225 and it has a single piston - just had to replace the seals on the piston - other than that works great
 

grady23

Well-Known Member
Joined
Mar 20, 2005
Messages
488
Reaction score
12
Points
18
Location
Maryland
Give the folks at SeaStar a call. They will be glad to help. I have a Single piston system on twin 150s that uses a link-Bar. As stated --- You will need to go to a dual piston set-up.