- Joined
- Dec 12, 2007
- Messages
- 15
- Reaction score
- 0
- Points
- 0
I have a 2006 228G and want to install an Airmar M260 in-hull transducer to integrate the a Raymarine DSM300 sounder. Can anyone (who is knowledgeable) tell me the best location for this unit, based on accessibility, hull density/thickness/etc.?
My gut tells me it would be on the keel, but the hull may be too thick there, or have pockets of soft material in it.
Want to get a good signal. Bought this boat rigged with great electronics, except the transducer was a cheapy.
Good advice would be appreciated.
My gut tells me it would be on the keel, but the hull may be too thick there, or have pockets of soft material in it.
Want to get a good signal. Bought this boat rigged with great electronics, except the transducer was a cheapy.
Good advice would be appreciated.