- Joined
- Sep 26, 2009
- Messages
- 508
- Reaction score
- 175
- Points
- 43
- Location
- Massachusetts
- Model
- Express 330
In process of replacing aft bilge pump on my 2003 330 express, had the generator removed over the winter so access is much better. One thing I'm noticing is that water is building up on the outside of the stringers, and on the starboard side of the keel stringer. I presume there are limber holes, but so far, my limited exploration has not uncovered them. There is a non-insignificant amount of debris in the bilge - old leaves, etc. I'm sure that is ultimately the cause of the blockage, but any hints on where the limber holes are located, or how large they are, etc? The platform for the generator covers most of that area, but there should be enough to feel down and around.